Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions For All Applications - Parkside PWSA 12 B1 Originalbetriebsanleitung

Akku-winkelschleifer
Vorschau ausblenden Andere Handbücher für PWSA 12 B1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 81
Safety instructions for
all applications
Common safety instructions
for grinding and cutting:
• This electric tool is to be
used as a grinder and
cutting grinder. Follow
all safety instructions, di-
rectives, illustrations and
facts which you receive
with the device. If you do
not follow these instructions,
an electrical shock, fire and/
or serious injury may occur.
• This electric tool is not
suitable for sanding,
wire brushing and pol-
ishing. Using the electric
tool in ways for which it is not
intended may cause hazards
and injuries.
• Do not use any ac-
cessories that are not
specifically intended
and recommended for
this electric tool by the
manufacturer. Simply be-
cause an accessory can be
attached to your electric tool
does not guarantee safe op-
eration.
• The allowable rotation
speed of the attachment
tools must be at least as
high as the highest rota-
tion speed indicated on
the electric tool. Acces-
sories that run faster than the
allowable speed can break
and fly apart.
• The outside diameter
and thickness of the at-
tachment tool must cor-
respond to the dimen-
sions indicated for your
electric tool. Attachment
tools which are wrongly
dimensioned cannot be suffi-
ciently shielded or controlled.
• Attachment tools with
threaded attachment
must fit the threading
of the grinding spindle
exactly. For attachment
tools which are mount-
ed through a flange,
the diameter of the hole
in the attachment tool
must fit the mounting
diameter of the flange.
Attachment tools which can-
not be precisely attached to
the electric tool turn unevenly,
vibrate very strongly and can
ultimately lead to a loss of
control.
• Never use damaged at-
tachment tools. Check
attachment tools such as
grinding discs for chip-
ping or cracks, grinding
plates for cracks, wear
or strong abrasion be-
fore using them. If the
electric tool or the at-
tachment tool falls off,
check whether it is dam-
aged or use an undam-
aged attachment tool.
If you have checked the
attachment tool and at-
tached it, keep yourself
and any nearby persons
GB
MT
69

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis