General Description; Extent Of The Delivery; Description Of Functions; Overview - Parkside Pwsa 12 B1 Originalbetriebsanleitung

GB MT

General description

See the front fold-out page for
illustrations.

Extent of the delivery

Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Device
- Cutting disc (preassembled)
- Battery-charger
- Battery
- Hex key (4 mm)
- Storage case
- Instruction Manual
- Instruction Manual Battery/Charger

Description of functions

The cordless angle grinder is suitable for
cutting and grinding metal, stone and
wood materials, plastic, tiles and non-
ferrous metals. There is a special disc for
each of the separate applications. Please
refer to the information from the disc manu-
facturer.
Please refer to the descriptions below for
information about the operating devices.

Overview

1 Protective hood
2 Cutting disc
3 Clamping screw
4 Spindle stop button
5 On/off switch
Battery Indicator (3 LEDs)
6
7 Handgrip
8 Battery release button
9 Battery
10 Storage case
64
11 Hex key
12 Charger
13 Mounting flange
14 Clamping flange

Technical data

Cordless angle grinder
Rated input voltage
Idling speed (n) .....................19500 min
Dimensions of cutting/
grinding disc ................... Ø
Bore hole ................................ Ø 10 mm
Maximum diameter
Cutting/grinding disc ............... Ø
Thickness of cutting/
grinding discs ..................... max. 6.5 mm
Grinding spindle thread ..................... M5
Sound pressure level
(L ) .................... 63.1dB(A); K
pA
Sound power level (L
measured .......... 74.1 dB(A); K
Vibration (a ) .... 2.275 m/s
h
The vibration values represent maximum
values which have been determined with the
supplied blade. The actual vibration values
may vary depending on the used acces-
sories.
The vibration values are still affected by the
handling for the user's.
Cutting disc PTS 76 (included):
Idling speed n ............. max.20300 min
0
Disc speed ....................... max. 80 m/s*
Outer diameter ........................ Ø 76 mm
Bore hole ................................ Ø 10 mm
Thickness ...................................... 1 mm
*
The grinding disc must keep a rotational
speed of 80 m/s.
You can use all grinding tools mentioned in
these operating instructions.
...PWSA 12 B1
......................12 V
76 x 10 mm
76 mm
= 3 dB
pA
)
WA
= 3 dB
WA
; K= 1.5 m/s
2
-1
2
-1