Technical Specification - 3M 6000 Serie Bedienungsanleitung

TECHNICAL SPECIFICATION

Respiratory Protection EN136 (Class 1) - for use with 3M Filters (bayonet) to EN14387:2004 or EN143:2000 and AS/NZS
1716:2012 (see Reference Leaflet).
3M6000 Series with ...
P1 Particulate Filters
P2 Particulate Filters
P3 Particulate Filters
Class 1 Gas & Vapour Filters
Class 2 Gas & Vapour Filters
3M™ Air Supply Unit
ES – Exposure Standard. *AS/NZS 1715 Required Minimum Protection Factor.
Eye Protection Meets the requirements of EN166 (Increased Robustness, Protection against High Speed Particles (medium
energy) and Lateral protection. Meets high impact rating and protection against hot solids to AS/NZS1337.
Flow Characteristics
Manufacturers Minimum Design flow (MMDF) 150 l/min.
Maximum Flow - See appropriate User Instructions.
Maximum Operating Temperature: +49 °C. CAUTION Care should be taken when using the equipment at low temperatures as
excessive moisture may cause the valves to freeze.
Maximum Exposure Limitations
10 x ES*
50 x ES*
Up to 100* x ES
Up to 50* x ES or 1000ppm (0.1% vol) whichever is lower.
Up to 100* x ES or 5000ppm (0.5% vol) whichever is lower.
100+ x ES
124