3M 6000 Serie Bedienungsanleitung Seite 7

TECHNICAL SPECIFICATION
Respiratory Protection EN136 (Class 1) - for use with 3M Filters (bayonet) to EN14387:2004 or EN143:2000 (see Reference
Leaflet).
3M 6000 Series with ...
P1 Particulate Filters
P2 Particulate Filters
P3 Particulate Filters
Class 1 Gas & Vapour Filters
Class 2 Gas & Vapour Filters
3M™ Air Supply Unit
WEL - Workplace Exposure Limit. * 3M assigned protection factor. Assigned Protection Factors are taken from HSE publications.
Eye Protection Meets the requirements of EN166 (Increased Robustness, Protection against High Speed Particles (medium
energy, grade B) and lateral protection.)
Flow Characteristics
Manufacturer's Minimum Design flow (MMDF) 150 l/min.
Maximum Flow - See appropriate User Instructions.
Maximum Operating Temperature: +49 °C. CAUTION Care should be taken when using the equipment at low temperatures as
excessive moisture may cause the valves to freeze.
Maximum Use Concentration
4 x WEL
10 x WEL
40 x WEL
20 x WEL or 1000ppm (0.1% vol) whichever is lower.
20 x WEL or 5000ppm (0.5% vol) whichever is lower.
40 x WEL
7