Charging Mobile Phones And Tablets; Using The Integrated Compressor - ULTIMATE SPEED UPK 10 B1 Bedienungs- Und Sicherheitshinweise

Using the device
function will be deactivated.
Please charge the power bank with
compressor using a network
1
adapter .
24
z Charging mobile
phones and tablets
Press the power switch for the
„ „
power bank with compressor
once.
Connect a suitable USB
„ „
charging cable to the USB port
(5V /2A)
11
(5V /1A)
12
it into your mobile phone or
tablet.
The charge process starts
„ „
automatically.
Please note: You cannot charge
USB devices (e.g. mobile phone,
tablet) while the power bank with
compressor is being charged.
1
z Using the integrated
compressor
Remove the cover cap for hose
„ „
connection
16
connection
15
with compressor
the compressed air hose
to the hose connection
power bank with compressor
(see Fig. C).
60 GB/IE
9
or the USB port
and then plug
from the hose
of the power bank
. Then screw
1
on
17
of the
15
1
Place the device on a level and
„ „
non-flammable surface. Do not
operate the device in a dusty
environment. This is a fire risk
and could also cause damage to
the device.
Use counter-pressure for
„ „
inflatable items (e.g. partially
filled car tyres): First switch the
device on before connecting
the compressed air hose
the tyre.
Please note: Depending on the
inflatable item, you can either use
the compressed air hose
or together with the valve adapters
, supplied in the scope of
21 22
delivery and use it.
23
Connecting the compressed
air hose without a valve
adapter
Screw the free end of the
„ „
compressed air hose
on to the connection valve of the
inflatable item.
Connecting the compressed
air hose with a valve adapter
The valve adapter
„ „
are located in storage compart-
ment for valve adapters
(see Fig. B).
First screw the desired valve
„ „
adapter ,
21 22
end of the compressed air
hose .
17
to
17
directly
17
directly
17
, and
21 22 23
14
or to the free
23