Equipment; Technical Specifications - ULTIMATE SPEED UPK 10 B1 Bedienungs- Und Sicherheitshinweise

Introduction
z Equipment
After unpacking the product,
please check that all of the
package contents are
present and that the power bank
with compressor is in perfect
condition. Do not use the device
if it is defective.
Power bank with compressor
1
On/Off switch for compressor
2
(0/I)
0 means "off".
I means "on".
"+" button
3
"–" button
4
Menu button "M"
5
Digital pressure gauge
6
with pressure display
(not calibrated)
LED light
7
Vehicle jumpstart outlet
8
Power bank switch
9
Charging port 15V
10
Output USB 5V
11
Output USB 5V
12
Indicator lights
13
Storage compartment
14
for valve adapter
Hose connection
15
Cover cap for hose connection
16
Compressed air hose
17
Jumper cable
18
Green Start LED
19
Red Error LED
20
Valve adapter for balls
21
Valve adapter for inflatable items
22
54 GB/IE
/0.4A
/2A
/1A
Valve adapter for inflatable items
23
AC adapter
24
Please note: The use of the term
'product' or 'device' in the following
text refers to the power bank
with compressor named in these
operating instructions.
z Technical specifications
The four individual cells used to
construct the rechargeable battery
are connected in series to produce a
total voltage of 4 × 3.2V ≈ 12V and
a capacity of 3500mAh. The battery
output produced in this way is the
same as the output from a recharge-
able battery with a total capacity of
14000mAh at 3.2V.
Model:
Battery type:
Battery capacity:
Charge cycles:
Charging time:
Peak current:
Starting current:
Operating
temperature:
Voltage:
Input voltage
(charging port):
UPK 10 B1
Lithium iron
phosphate
14.000mAh
3.2V ,
44.8Wh
2000
up to 8 hours
400A
200A
0°C–60°C
12V
15V /0.4A