Using The Jumpstart Feature - ULTIMATE SPEED UPK 10 B1 Bedienungs- Und Sicherheitshinweise

Using the device
Flash mode
To switch on the LED light
„ „
the flash or SOS mode, first press
the power bank switch
3 seconds. Then the LED light
will be permanently lit.
Briefly press the power bank
„ „
switch once again and the LED
9
light will switch to flash mode.
7
Briefly press the power bank
„ „
switch once again and the
9
LED light will switch to the
7
SOS mode. There will be
3 short flashes, 3 long flashes
and another 3 short flashes.
Briefly press the power bank
„ „
switch once again to switch
9
off the LED light
Caution! Do not look
directly at the LED lights
this can damage your eyes.
Please note: It is not possible
to turn on the light while the
power bank with compressor
is charging.
64 GB/IE
in
7
for
9
7
.
7
as
7
1
z Using the jumpstart
feature
When using the jumpstart,
„ „
make sure that at least
3 indicator lights
permanently illuminated.
1
are
13
B A
2. 1.