Final Preparations; Selecting The Exposure Program - Sirona Orthophos Plus Gebrauchsanweisung

6 Operating
6.3

Final Preparations

A
9
,,,,,,
10
I4.I P I
62
I6
34
7
H3...
manuall
• Swing in the cassette holder (7).
• nsert the film cassette (9) in the cassette carriage
until the lock (10) engages.
i
NOTE
The cassette locks A must be placed up!
• The Ready LED at the Multitimer switches off to let
you know that the unit is ready for the exposure.
CAUTION
Should the Ready LED go on blinking, call up the help
message H3.. to look for the reason.
The list of help messages you find at the inside of the
door.

Selecting the Exposure Program

• Selecting the Exposure Program by pressing the –
+ buttons.
The exposure program selected, e.g. P1, and the corre-
sponding maximum exposure time are alternatively
shown on the digital display.
i
NOTE
When, with preselection of the exposure program, "O 1"
appears on the display instead of, for example, "P 1", you
have erroneously selected a mode provided for servic-
ing. You can leave this mode by pressing the "Memory"
button and then "Program +" or by switching to another
exposure program.
Sirona Dental Systems GmbH
60 82 023 D3297
D3297.201.01.11.02