Safety Symbols; Markings; What Is What (Figure A) - Dräger X-plore 6300 Gebrauchsanweisung

Safety Symbols

While reading this Manual, you will come across a number of warn-
ings concerning some of the risks and dangers you may face while
using the device. These warnings contain "signal" words that will alert
you to the degree of hazard you may encounter. These words, and the
hazard they describe, are as follows:
DANGER!
Indicates an imminently hazardous situation which,
if not avoided, will result in death or serious injury.
WARNING!
Indicates a potentially hazardous situation which, if
not avoided, could result in death or serious injury.
CAUTION!
Indicates a potentially hazardous situation which, if
not avoided, could result in physical injury to you, or
damage to the product.
It may also be used to alert against unsafe
practices.
Furthermore, there are more general notes which are indicated as fol-
lows:
NOTE
Indicates additional information on how to use the
device.

Markings

These Instructions for Use apply to masks with the following type
identity markings:
X-plore 6300 – EPDM – PMMA – RA K/bl
X-plore 6500 – EPDM – PC
X-plore 6500 – EPDM – L
X-plore 6500 – Si/ge – L
X-plore 6500 – Si/bl – PC
These markings are externally legible and are positioned as follows:
— X-plore 6300/6500 and EPDM or Si on the mask.
— L, PC or PMMA on the lens.
— RA on the mask connector.
— K/sw or K/bl on the lens frame.
— CE mark on the mask body:
X-plore 6300 EN 136:1998 CL. 2, no. 0158 or
X-plore 6500 EN 136:1998 CL. 3, no. 0158

What is What (Figure A)

1 Facepiece connector 5 Lens frame
2 Nose cup valve 6 Front strap
3 Nose cup 7 Head strap
4 Lens 8 Sealing frame 12 Exhalation valve
– RA K/bl
– RA
– RA
– RA K/sw
9 Neck strap
10 Mask body
11 Connector clamp
cover
15