Otto Bock Avantgarde series Bedienungsanleitung Seite 92

Seat height table XXL 2
Anterior seat height (in cm),
Posterior seat height (in cm),
Important:
Between the front and rear axle position, the axle can be adjusted horizontally in 7 positions (A to G). Position A allows a passive center of
gravity, whilst in position G, the most active center of gravity is reached.
If no indication for the desired rear wheel position is made, it will be factory-mounted in position D/ 4. Seat inclination: 10 cm maximal seat height
difference between anterior seat height and posterior seat height (corresponds to a seat inclination of approx. 1°).
Note: Without indication of the desired seat inclination, it will be factory-set at approx. 4°.
The values indicated are measurements which have been theoretically determined. Not all adjustment possibilities can be used for all
wheelchair models. Further, the adjustment combinations are limited due to the frame geometry. We reserve the right to technical alterations
and tolerances.
92
measured without seat cushion and with 0° seat inclination
Caster fork short
Caster fork long
1) Combination is not possible.
The anterior seat height is dependent on the selected wheel size,
caster fork, and mounting position. Please refer to the seat height
table!
measured without seat cushion and with 0° seat inclination
Caster diameter
Position
140 mm 7"
Position 4 1) 1)
Position  1) 1)
Position 2 4 1)
Position 1 47 49
Position 4 47 49
Position  48 0
Position 2 49, 1,
Position 1 0, 2,
Mounting Rear wheel size/tires
24"
positions
1 40
2 42,
 44,
4 47
 49
6 1
The posterior seat height is dependent on the
selected wheel size and mounting position in the rear
wheel attachment device. Please refer to the seat
height table!
8"
1)
1)
1)
1)
1)
1
2,
,
26"
42
44,
46,
49
1