Height Adjustment Of The Footrest Avantgarde Ti, Ti 8.9 And Ti Ultra - Otto Bock Avantgarde series Bedienungsanleitung

Height Adjustment of the Footrest Avantgarde T, Ti
8.9 and Ti Ultra
By loosening the screws at the footrest bar, the footplate can be continuously
adjusted according to your specific lower leg length and to the seat cushion being
used.
There are two threaded holes in the footrest bar, it therefore may be necessary
to completely remove the screw and use the second hole to achieve the desired
footrest height.
Be sure the cap screws have been re-tightened with a torque moment of 10 Nm.
By loosening the screw (Fig. , item a), the footplate can be adjusted according to your specific
lower leg length and to the seat cushion being used.
Ensure when adjusting the height that the footrest bar (item b) is pushed into the swivel
segment (item c) at least 60 mm.
Ensure when making adjustments to tighten the screw (item a) with a torque of 8
Nm.
70
77