Otto Bock Avantgarde series Bedienungsanleitung Seite 87

Inflating
Check both sides of the wheel to ensure that the tire is seated correctly and fully on the rim.
Push the valve back up slightly into the tire then pull it out again so the tire is well-seated in the
valve area.
Inflate the tire with enough air so that it can be pressed in easily with your thumb. Ensure the tire
is centered on the rim before continuing. If not, let some air out and realign the tire. Inflate the
tire to the pressure indicated on the side wall, then re-fit and tighten the dust cap.
87