Note; Key To Symbols - GEZE E740 Syncro System- Und Montageanleitung

1

Note

 Key to symbols
means "important note"
 Safety precautions for the automatic drive E740 Syncro
ATTENTION. IMPORTANT SAFETY INSTRUCTIONS:
IT IS IMPORTANT TO FOLLOW THESE INSTRUCTIONS IN ORDER TO ENSURE THE
SAFETY OF PERSONS.
THESE INSTRUCTIONS ARE TO BE RETAINED.
- Only qualified personnel who are authorised by GEZE may carry out mounting, commissioning
and maintenance. GEZE shall not be liable for injuries or damage resulting from unauthorised
modification of the equipment.
- GEZE is not liable if products from other manufacturers are used with GEZE equipment. Use
only original GEZE parts for repair and maintenance work as well.
- The connection to the power supply (230 V AC or 24 V DC) has to be carried out by a qualified
electrician, in accordance with the respective wiring diagram. Carry out the power connection
and equipment earth conductor test in accordance with VDE 0100.
- Use a customer-accessible 10-A overload cut-out as the line-side disconnecting device in ac-
cordance with the permissible current carrying capacity of the cable.
- In accordance with Machine Directive 98/37/EC, a danger analysis must be performed and the
window system identified in accordance with CE Identification Directive 93/68/EEC before
commissioning the window system.
- Observe the latest versions of guidelines, standards and country-specific regulations, in par-
ticular:
- BGR 232 "Guidelines for power-operated windows, doors and gates";
- VDE 0100, Part 610 "Installation of high-voltage systems with nominal voltages up to 1000 V;
- VDE 0700, Part 238 "Safety of electrical devices for home use and similar purposes, drives for
windows, doors, gates and similar systems";
- Accident-prevention regulations, especially VBG1 "General regulations" and VBG4 "Electrical
systems and equipment";
- Do not allow children to play with fixed mounted control systems of all types and keep remote
controls out of reach of children.
- Ensure that enclosing between the driven part and the surrounding parts due to the opening
movement of the driven part is prevented.
- After mounting has been completed, check that the drive is set correctly and functions cor-
rectly.
0