Adjusting The Width - Vermeiren Inovys II Gebrauchsanweisung

Adjusting the depth:

1. Loosen bolt on plate Ⓐ.
2. Adjust the depth of the leg support to a comfortable position (7 different positions in
steps of 15 mm).

3. Retighten the bolt

Adjusting the width:

3.8.3 Adjusting angle foot plate
Adjust the angle of the footplate as follow:

1. Loosen bolt .
2. Adjust tube  in the desired angle. The angle indication (80°-85°-90°-95°-100°) is
according the dashes .
3. Retighten the bolt
.
1. Loosen the two bolts
2. Adjust the width of the leg support to a comfortable position
(2 different positions in steps of 20 mm, do not use the
middle hole  for adjusting).
3. Retighten the two bolts

.
Page 19

on the back of leg support cushion.

.
100°
80°
EN
Inovys II
2011-11
NL