3
The instructions in this chapter are for the specialist dealer.
The Vermeiren D200 has been designed to be adjust with a minimum of replacements parts.
There is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
A list of Vermeiren facilities can be found on the last page.
L
WARNING:
manual.
L
WARNING:
wheelchair (tilt back or sideways).
3.1
To set up the wheelchair the following tools are needed.
3.2
The Vermeiren D200 shall be delivered with:
3.3
The Vermeiren D200 is adjustable in 3 seat heights by changing the wheels position. At each
height there is a different setting of the front and rear wheels.
L
WARNING:
axle - This hole is for mounting the drum brake.
Downloaded from
www.Manualslib.com
Installation and adjustment
Risk of unsafe settings - Use only the settings described in this
Variation of allowed adjustments can still change the stability of your
Tools
Wrench set n° 7 to n° 22
Allen key set n° 3 to n° 8
Screwdriver n° 4 to n° 5
Screwdriver Phillips head
Manner of delivery
1 frame with armrests, rear and front wheels (seat height of 500 mm)
1 pair footrests
Tools
Manual
Accessories
Adjusting the seat height
The top hole of the axle plate is not intended for mounting the rear
Seat height
470 mm
500 mm
(Standard)
530 mm
manuals search engine
Rear wheel
Hole 1 and Hole 2
Hole 2 and Hole 3
Hole 3 and Hole 4
Table 2: Seat heights
Page 16
D200
2014-08
Front wheel
Hole A
Hole B
Hole C