Installation And Adjustment; Tools; Manner Of Delivery; Adjusting The Footrests - Vermeiren Jazz S50 Gebrauchsanweisung

4

Installation and adjustment

The instructions in this chapter are for the specialist dealer.
The Vermeiren Jazz S50 has been designed as wheelchair with a minimum of adjustments. There
is no need for extra stock of spare parts.
To find a service facility or specialist dealer near you, contact the nearest Vermeiren facility.
WARNING
 Use only the settings described in this manual.
 Variation of allowed adjustments can still change the stability of your wheelchair (tilt back or
sideways).
4.1

Tools

To set up the wheelchair the following tools are needed.
 Wrench set n° 7 to n° 22
 Allen key set n° 3 to n° 8
 Screwdriver Phillips head
4.2

Manner of delivery

The Vermeiren Jazz S50 shall be delivered with:
 1 frame with armrests, rear and front wheels (seat height of 500 mm)
 1 pair footrests
 Tools
 Manual
 Accessories (optional)
 Tyre pump
4.3

Adjusting the footrests

CAUTION
Adjust the length of the footrests as follow:
1. Remove the screw (1).
2. Adjust the length of the footrest to a comfortable length.
3. Tighten the screw (1) properly.
Risk of injuries and damage
Risk of damage – Avoid that the footrests make any contact with the ground.
Keep a minimum distance from 60 mm above the ground.
11
Jazz S50
2020-09
Installation and adjustment
EN
NL