YOKOGAWA TDLS8000 Bedienungsanleitung Seite 338

Model: YH8000
Specific Condition of Use:
-Precautions shall be taken to minimize the risk from electrostatic discharge of painted
parts and non-metallic parts of the enclosure.
Notes:
1. No revision to this drawing without prior approval of FM.
2. Installation must be in accordance with the National Electric Code (NFPA 70) and
relevant local codes.
3. The thread type of the cable entries must be confirmed according to the user 's manual.
4. Screws of the field wiring terminals must be tightened with the specified torque value:
0.22 to 0.25 Nm.
5. Field wiring for ethernet communication must be in accordance with IEEE 802.3 so as
to avoid overvoltage of > 119 V.
6. WARNING – POTENTIAL ELECTROSTATIC CHARGING HAZARD – SEE USER'S
MANUAL
7. WARNING – DO NOT OPEN WHEN AN EXPLOSIVE ATMOSPHERE MAY BE
PRESENT
8. WARNING – SUBSTITUTION OF COMPONENTS MAY IMPAIR SUITABILITY FOR
DIVISION 2
Rev.1: December 24, 2015
<Anhang 8 Explosionsgeschütztes Instrument>
Yokogawa Electric Corporation
Date: January 23, 2015
Doc. No.: NFM030-A71 P.2
IM 11Y01D01-01D-E
Anh.8-35
5. Ausgabe: 15. Januar 2019-00