Introduction - HBM QuantumX CX22-W Bedienungsanleitung

QuantumX Data Recorder CX22‐W
2

Introduction

This manual is intended to support you in setting the basic settings of your
QuantumX Data Recorder. The CX22 Data Recorder is available in two
versions: CX22 and CX22‐W. The CX22‐W version also has a WLAN module
with a WLAN antenna on the front of the module.
All measurement technology settings are implemented using the catman
software, which has an extensive online Help.
This manual shows you:
•
How to connect the module.
•
What options are available for connecting to the module.
•
How to connect to the module.
QuantumX modules are connected to the CX22‐W Data Recorder via
FireWire in the same way as is the case with other QuantumX modules,
alternatively, you can connect QuantumX modules via Ethernet.
The complete QuantumX documentation comprises:
•
This operating manual
•
QuantumX operating manual with pin assignments
•
The QuantumX Data Recorder data sheet
•
QuantumX module data sheets
•
Online Help in the software
®
• catman
AP
• QuantumX Assistant
• Sensor database
• TEDS Editor
• Programming interface API (.NET/COM)
• LabVIEWt library (VIs)
• DIAdemt driver
• Examples for LabVIEWt and API (.NET/COM)
A3169-1.0 en/de
11
®
AP
HBM