Updating Catman; Installing Windows Software - HBM QuantumX CX22-W Bedienungsanleitung

QuantumX Data Recorder CX22‐W
The actual recovery process takes approx. 12 minutes, but is dependent
on the data transmission speed of your USB memory stick.
10. If a monitor is connected, disconnect the USB memory stick as soon as
the message indicating that recovery was successful appears ("... suc­
cessfully recovered"). Otherwise wait another 2 to 5 minutes (depending
on the speed of your USB memory stick).
11. In the next dialog, click on Reboot or press the return key.
The CX22‐W is restarted twice and is then ready for operation again. If the
second start does not occur automatically, do not implement a new start (click
on No following the query "Do you want to restart your computer now?"),
instead click on Commit changes and reboot in the start screen.

11.3 Updating catman

®
Updating catman
with the latest software (Section 11.2), this will also bring catman
date.

11.4 Installing Windows software

The installation of other software packages is possible in principle, however
we do not recommend this in order not to endanger the stability of the CX22
Data Recorder. If further software is installed, the warranty for the CX22 Data
Recorder function is rendered void and no support can be provided by HBM
for any errors resulting therefrom.
Important
Changes to the system must be permanently saved before a new start. In the
start screen, click on Commit changes and reboot.
A3169-1.0 en/de
[
AP
AP is not proposed. Where necessary, carry out a recovery
41
®
AP up to
HBM