Threading The Machine Head - JUKI MEB-3200 Betriebsanleitung

(3) Threading the machine head

WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of
the sewing machine.
Threading the upper thread (needle thread)
Standard Optional
Threading the lower thread (looper thread)
DANGER :
1. If you find the sewing machine is too heavy to lift, the gas spring may have malfunctioned due to
outgassing.
Never lift the sewing machine in such a state since the machine can drop to pinch hands, fingers
and arms resulting in serious injury.
* Be sure to fully understand the standard of replacing time of the gas spring on p.56 and its re-
placement procedure on p.57 before putting the sewing machine into operation.
2. In order to prevent pinching of hands, fingers and arms that can result in a serious injury, be
sure to strictly observe the following when carrying out work.
2-1. Be sure to hold the rib on the bed periphery when holding the sewing machine.
2-2. Be sure to lock the hinge stopper to firmly secure the sewing machine in its raised position.
10
中国缝纫机设备网
www.fengrenjicn.com