Threading The Machine Head - JUKI LK-1942ZA5050 Betriebsanleitung

2. Threading the machine head

WARNING :
Do not place your fingers or any thing under the presser since there is a danger of damage of your
fingers or hands caused by being caught in the presser, needle, etc.
PATTERN No.
X-SCALE
Y-SCALE
SPEED
COUNTER
WINDER
THREAD
CUTTER TEMP
When threading through the needle, perform follow-
ing operation to lower the intermediate presser and
the feeding frame.
1) Press key on the operation box to light up
the threading LED.
2) Press key and the intermediate presser and
the feeding frame come down.
3) After threading through the needle, press again
key, and the intermediate presser and the
feeding frame return to their home positions.
To make one turn
– 6 –