Beurer PM 110 Bedienungsanleitung Seite 25

To reset the stopwatch to zero, stop it and keep SELECT/LAP pressed for 2 seconds.
1.2 Intermediate times and lap times
This timer allows up to 8 lap or intermediate times to be recorded with the stopwatch run-
ning.
Recording intermediate times and lap times
Select the 'intermediate time' or 'lap time' display mode with the UP/LIGHT button.
Intermediate time:
Stop an intermediate time with SELECT/LAP: the entire time display is then stopped for 10 seconds.
The intermediate time number appears at bottom left starting at "0". The lap time does not appear.
Lap time:
You can recognize this setting by the symbol "LAP" in the display.
Stop a lap time with SELECT/LAP: the lap time is then displayed. The lap number appears
at bottom left starting at "0". After ten seconds, the entire time is displayed again.
After you have recorded 8 intermediate/lap times, the initially recorded intermediate/lap
times are overwritten.
calling up intermediate times and lap times
In order to call up intermediate/lap times already recorded, you must stop the stopwatch.
Select the "intermediate time" or "lap time" mode with the UP/LIGHT button.
Intermediate time:
Press SELECT/LAP: the intermediate time is displayed together with the intermediate time number.
You will recognize this setting by the symbol "MEM" in the display. Press SELECT/LAP to
call up the other intermediate times.
Lap time:
Press SELECT/LAP: the stored lap time is displayed together with the lap number. You
will recognize this setting by the symbol "LAP" and "MEM" in the display. Press SELECT/
LAP to call up the other lap times.
Press MODE to return to the stopwatch mode.
As soon as you reset the stopwatch to zero, the lap and intermediate times are also dele-
ted.
8. Pulse mode

LAP
MEM
LAP MEM
B/M
B/M
B/M
%