Herunterladen Inhalt Inhalt Diese Seite drucken

Introduction; Intended Use; Residual Risk; Features - Parkside PFDS 33 A1 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für PFDS 33 A1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
FLUX-CORED WIRE WELDER PFDS 33 A1

Introduction

Congratulations on the purchase of your new appliance. You have selected
a high-quality product. The operating instructions are part of this product.
They contain important information about safety, usage and disposal.
Before using the product, please familiarise yourself with all operating and
safety instructions. Use the product only as described and for the range of
applications specified. Please also pass these operating instructions on to
any future owner.

Intended use

The appliance is suitable for self-shielded flux-core welding using an
appropriate wire. No additional gas is required. The protective gas is
contained in powdered form in the wire itself, is thus fed directly into the
arc and means that the appliance is not susceptible to wind and can be
used outside.
Only the filler wire designed for this appliance may be used.
Proper use also involves compliance with the safety instructions as well as
the assembly instruction and the operating notes in the operating instruc-
tions.
Comply exactly with the applicable accident prevention regulations.
The appliance may not be used:
in rooms with insufficient ventilation,
in damp or wet environments,
in explosive atmospheres,
for the purpose of thawing pipes,
in the vicinity of people with heart pacemakers and
in the vicinity of flammable materials.
Use this appliance only as described in this instruction manual. All other
uses are deemed to be improper and may result in property damage or
even in personal injury.
The manufacturer is not liable for damages caused by improper or incorrect
use.

Residual risk

Even if you operate this appliance properly, there will still be residual risks.
The following risks can occur in the context of the design and construction
of this flux-core welder:
Eye injuries from flashes,
Touching hot parts of the appliance or the workpiece (burns),
In the case of insufficient protection, risk of accidents and burns due to
flying sparks or slag,
Harmful emissions of smoke and gases in the event of poor ventilation
or insufficient extraction in closed rooms.
Reduce the residual risks by using the appliance carefully and in accordance
with all the instructions.
 GB │ IE
18 

Features

Cover wire feed unit
Carrying strap
Catch
Mains plug
Earth cable with earth clamp
Cable assembly with direct connection
Torch button
Torch
Steel sleeve
Setting wheel for wire feed
MIN/MAX switch for welding current
1/2 switch for welding current
Main switch ON/OFF (incl. power indicator)
Overload protection control lamp
Torch nozzle (1.0 mm)
Torch nozzle (0.8 mm)
Flux-core wire spool (wire roll) Ø 0.9 mm/510 g
Chipping hammer with steel brush
Welding mask after assembly, consisting of:
Protective plate
Protective glass catch
Mounting clip
Dark welding lens
Handle

Package contents

1 flux-cored wire welder PFDS 33 A1
1 steel sleeve (pre-assembled)
3 weld nozzles ( 1 x 1.0 mm pre-assembled; 1 x 0.8 mm; 1 x 1.0 mm)
1 chipping hammer with steel brush
1 flux-core wire Ø 0.9 mm/510 g
1 welding mask
1 carrying strap
1 set of operating instructions
PFDS 33 A1

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Inhaltsverzeichnis