Introduction; Intended Use; Scope Of Delivery - Parkside PTMI 180 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Arc beams can damage your eyes
and injure your skin.
Electromagnetic fields can disrupt
M V
the function of cardiac pacemakers.
Attention: Potential hazards!
Greatest rated value of the mains
I
power
1 max
H
Insulation class
Made from recycled material.
Greatest rated value of the
welding time in continuous
mode t
Inverter Welder PTMI 180 A1
z Introduction
Congratulations! You have purchased one of our high-quality products. Please familiarise
yourself with the product before using it for the first time. Please also read the safety
instructions carefully. This product must be set up or used only by people who have been
trained to do so.
KEEP OUT OF THE REACH OF CHILDREN!
z Intended use
This welder is ideal for electrode welding (MMA) and tungsten inert gas welding (TIG) for welding metals
such as carbon steel, steel alloy, stainless steel and other premium steel. If it is not handled properly the
product can be dangerous for individuals, animals and property. Use the product only as described and
only for the specific applications as stated. Keep these instructions in a safe place.
Ensure you hand over all documentation when passing the product on to anyone else. Any use that
differs to the intended use as stated above is prohibited and potentially dangerous. Damage or injury
caused by misuse or disregarding the above warning is not covered by the warranty or any liability on
the part of the manufacturer. Commercial use will void the guarantee.
z Scope of delivery
1 inverter welder
1 electrode holder (MMA)
1 TIG torch
1 earthing clamp
6 GB/IE/CY
ON (max)
Dispose of the device and
packaging in an environmentally
friendly manner!
Manual arc welding with
encased rod electrodes
IP21S
Protection class
Single-phase static frequency
converter-transformer-
commutator
Direct current
Greatest rated value of the
welding time in intermittent
mode Σ
Tungsten inert gas welding
1 carry strap
2 MMA welding electrodes (2 x 2.5 mm)
1 TIG electrode 1.6 mm
1 set of operating instructions
t
ON