Safety Instructions - Ottobock 1A30 Gebrauchsanweisung

1.3 Single components (Fig. 2,
• 1A31=(side)(size) Greissinger plus (7)
Shaped foot component without adapter
• 2R86=(size) Foam Connection Cap (8)
2 Description
2.1 Indications for use
The 1A30 Greissinger plus Foot is to be exclusively used for the prosthetic
fitting of amputations of the lower limb.
2.2 Field of application
Field of application according to the Ottobock MOBIS Mobility System:
1A30=24-25
Recommended for amputees with Mobility Grades 2 and 3
(restricted outdoor walkers and non-restricted outdoor walkers).
Approved for a patient weight of up to 75 kg/165 lbs.
1A30=26-29
Recommended for amputees with Mobility Grades 2 and 3
(restricted outdoor walkers and non-restricted outdoor walkers).
Approved for a patient weight of up to 100 kg/220 lbs.

3 Safety instructions

Attention!
Improper use can weaken components of the prosthetic foot. To
avoid the risk of accident and possible injury to the patient, the
foot must no longer be used after a sudden loss of function has
occurred. This noticeable loss of function can manifest itself as
reduced support during roll-over or decreased forefoot resistance.
Measure
Have the prosthetic foot examined and, if necessary, replaced at
a specialist workshop.
Please avoid exposing prosthetic components to
• corrosive elements such as fresh water, salt water, and acids, or
• abrasive substances (e.g. sand).
)
Ottobock | 9