Storage; Waste Disposal And Environmental Protection; Replacement Parts/Accessories - Parkside PDOS 200 B2 Originalbetriebsanleitung

Storage

• Store the appliance in a dry place well
out of reach of children.
• Grinding discs must be stored dry and
upright and are not to be stacked.

Replacement parts/accessories

Spare parts and accessories can be obtained at
If you do not have internet access, please contact the Service Centre via telephone
(see "Service-Center" page 48). Please have the order number mentioned below ready.
Position Position
Instruction Exploded
manual drawing
1,2,3 SET1
11 SET3 LEFT
SET3 RIGHT
14 SET2
10 5
28
10a 3
29
10b 4
* G = granulation / external diameter x hole x thickness in mm
Waste disposal and en-
vironmental protection
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have finished with them.
Hand over the device at an utilization loca-
tion. The plastic and metal parts employed
can be separated out into pure materials
and recycling can be implemented. Ask your
Service Center about this. Defective units re-
turned to us will be disposed of for free.
www.grizzly-service.eu
Description
Spark protection, holder and adjusting screw
Workpiece support, left
Workpiece support, right
On/off-switch
Grinding disc, left
(G 36 / Ø 150 mm x Ø 12,7 mm x 20 mm)*
Grinding disc, right
(G 80 / Ø 150 mm x Ø 12,7 mm x 20 mm)*
Grinding disc nut,
Grinding disc nut,
Clamping flange
Machines are not to be place with
domestic waste.
left
right
G B MT
Order
number
91103556
91103558
91103559
91103557
91103553
91103554
91103551
91103555
91103552
4 5