buster Magnum Pro Betriebsanleitung Seite 283

Essential safety requirements by category
2 General requirements
2.1 Hull marking (CIN)
2.2 Builder's plate
2.3 Protection from falling overboard
2.4 Visibility from the steering position
2.5 Owner's manual
3.1 Structure
3.2 Stability and freeboard
Buoyancy and flotation
3.3
3.4 Openings in the hull and on deck
3.5 Flooding
3.6 Maximum load permitted
3.7 Life raft stowage
3.8 Escape
3.9 Anchoring, mooring and towing
4 Handling characteristics
5 Installation requirements
5.1 Engines and engine spaces
5.1.1 Inboard engines
5.1.2 Ventilation
5.1.3 Exposed parts
5.1.4 Outboard engines starting
5.2 Fuel system
5.2.1 Fuel system (general)
5.2.2 Fuel tanks
5.3 Electrical system
5.4 Steering system
5.4.1 Steering system (general)
5.4.2 Emergency arrangements
5.5 Gas system
5.6 Fire protection
5.6.1 Fire protection (general)
Fire-fighting equipment
5.6.2
5.7 Navigation lights
5.8 Discharge prevention
- = The item is not relevant to the safety of the vessel type or the system does not exist on the vessel.
Buster Magnum M5
EN ISO 8666:2002
ISO 10087:2006
RCD Annex 1, 2.2
EN ISO 15085:2003/A1:2009
RSG Guidelines
EN ISO 11591:2011
EN ISO 10240:2004
EN ISO 12215-3:2002
EN ISO 12215-4:2002
EN ISO 12215-5:2008
EN ISO 12215-6:2008
EN ISO 12217-1: 2013
EN ISO 12217-1: 2013
EN ISO 9093-1: 1997
EN ISO 15083:2003
EN ISO 8849:2003
EN ISO 11812:2001
EN ISO 14946:2001 / AC: 2005
RCD Annex I 3.7
-
EN ISO 15084:2003
EN ISO 11592:2001
-
-
-
-
-
EN ISO 10088:2013
EN ISO 11105:1997
EN ISO 21487:2012
EN ISO 10133:2012
EN ISO 10592:1995/A1:2000
-
-
EN ISO 9094-1: 2003
-
EN ISO 16180:2013
1972 COLREG
-
282 (282)