Identification; Installation; Mechanical Mounting - Siko AP10 Originalmontageanleitung

AP10

Identification

External magnetic fields
CAUTION
Failures and data loss occur if strong magnetic fields influence the internal
measuring system.
` Protect the position indicator from impact by external magnets.
3 Identification
Please check the particular type of unit and type number from the identifi-
cation plate. Type number and the corresponding version are indicated in
the delivery documentation.
e. g.

4 Installation

4.1 Mechanical mounting

Destruction of main bearings
CAUTION
Improper installation (e. g. tension on the driving shaft) causes additio-
nal heat development and destruction of the position indicator in the long
term.
` Ensure a low shaft and angle offset between shaft and accommoda-
Destruction of the position indicator
CAUTION
Heavy dirt load results in reduced service life of the main bearing.
` Apply protective measures (e. g. V-ring) in order to reduce the dirt
Position indicator failure
CAUTION
` When mounting pay attention to the IP type of protection (see chap-
` Do not open the position indicator yourself (exception: see chapter 6).
` Avoid impact on the device.
` Do not modify the device in any way.
AP10 · Date 25.09.2014 · Art. No. 86832 · Mod. status 356/14
-
AP10 0023
version number
type of unit
tion bore by applying appropriate manufacturing methods (see
Tab. 1).
+
load.
ter 9).
English 23
Fig. 1