Setting The Limit Signal Transmitter - ABB VA Master FAM540 Inbetriebnahmeanleitung

Commissioning
5.4

Setting the limit signal transmitter

Fig. 20
1. Screw off housing cover.
2. Loosen screws (1) and remove cover plate (2).
3. Loosen screws (3 + 4).
4. Move the limit signal transmitter (5) into the desired position.
5. Tighten screws (3 + 4).
6. Replace cover plate (2) and tighten screws (1).
7. Screw on housing cover.
Important
For explosion-proof devices, remove the safety locking device when opening the cover and
reattach it after closing the housing.
24 - EN VA Master FAM540 CI/FAM540-X1