Inhaltsverzeichnis
Werbung
Replacing the filter unit
1
2
When your non-washable filter unit needs replacing
the appliance will display the pattern shown. To
replace the non-washable filter unit, follow these
steps. Ensure the appliance is unplugged, if the
appliance has been in use, leave for 1 to 2 hours
before replacing the filter unit to allow the appliance
to cool down completely. Your Dyson appliance is
programmed to remind you to replace the filter unit
after 12 months based on 12 hours usage a day.
Please note your indicator will activate sooner with
more use. The indicator is only a guide and you
may need to replace the filter unit more regularly.
4
5
7
8
56
3
Please note your filter may require replacing
more frequently with more use.
6
9
click
Replacing the filter unit
10
13
6 sec
click
The Dyson Link app will notify you when your non-washable filter needs to be replaced.
The filter indicator can also be reset from within the Dyson Link app.
Please note your filter may require replacing more frequently with more use.
11
12
click
click
A clockwise-rotating loading pattern will be
shown on the LED display.
When you have re-assembled your appliance, press and hold the 'Standby ON/OFF' button
for 6 seconds on the remote control to reset the filter indicator.
Clean the hatch every time the filter is
replaced. Open the small hatch on the
side of the appliance. Use a cotton bud
to clean inside and remove any debris.
This maintains sensor accuracy and
ensures the continuing high performance
of the appliance.
Once the loading pattern is complete, the
appliance will return to its normal usage.
57
Werbung
Inhaltsverzeichnis
