Before Use; Fitting The Connector Nipple - Parkside PDRS 27 A1 Originalbetriebsanleitung

■ Keep work area clean and well lit. Cluttered or dark areas invite
accidents.
■ Keep compressed air tools out of reach of children.
■ Do not store outdoors or in damp environments without protection.
■ Protect the compressed air tool, in particular the compressed air
connection and operating elements against dust and dirt.

Before use

NOTE
► The compressed air tool may only be operated using cleaned,
oil-atomised compressed air and the maximum operating pres-
sure of 6.3 bar must not be exceeded on the appliance. The
compressor must be fitted with a pressure reducer to regulate
the working pressure.

Fitting the connector nipple

♦ Screw the connector nipple
in delivery state).
PDRS 27 A1
into the air inlet
GB │ IE
(Pre-assembled
│
55 ■