Operation
Compressed air ratchet
♦
Fit the required plug-in attachment
piece
onto the square retainer
♦
Set the correct rotational direction on the turn bolt
R = anticlockwise
F = clockwise
♦
Fit the plug-in attachment onto the screw head.
NOTE
►
The connection with the compressed air source is made using a
flexible compressed air hose with a quick coupler.
You will reach the best performance of your ratchet wrench
with a compressed air hose LW 10 mm.
Switching on and off
Switching on:
♦
Press the trigger
Switching off:
♦
Release the trigger
♦
When you have finished working, disconnect the tool from the
compressed air source.
│
GB │ IE
■
58
to turn the appliance on.
.
,
+
or the extension
.
PDRS 27 A1
: