Operating The Machine; Normal Operation; Inserting The Wire; Counter Menu - Weidmuller Crimpfix E Originalbetriebsanleitung

6 Operating the machine

6.1

Normal operation

►
Inset the wire-end ferrule reel.
►
Things to check prior to each
activation:
–
Is the electricity cable in fault-free
condition?
–
Is the front flap closed?
►
Switch on the machine.
The touch display shows readiness for operation.
6.2

Inserting the wire

Only process wires that are cut cleanly.
All stranded wire must finish with the
insulation. No stranded wire may be
shortened or protrude.
Ensure that the end of the wire is
inserted evenly.
►
Insert a wire into the insertion funnel.
The material is drawn in slightly and processed
automatically. Machine noises are audible during
this process.
►
Hold the wire tightened slightly.
►
Once the processing is complete
(no more noises), pull the processed wire out.
36
6.3

Counter menu

Prerequisites:
The machine is switched on and is located in
the start position.
►
Press the touch display for 3 s
 the counter menu opens.
+1 4
+1 0
199996
6.4

Resetting the day counter

►
Switch to the counter menu.
►
Press the touch display 3 s
 Day number is set to zero.
►
Briefly press the touch display
 Return to start menu.
Total counter
Day counter
Service counter
2516400000/01/03.2017