Emptying Waste Containers; Cleaning Wire-Holding Tongs - Weidmuller Crimpfix E Originalbetriebsanleitung

7.4

Emptying waste containers

Figure 7.2 Waste container
Depending on the thickness of the stripped
material, the waste container should be
emptied after every 2,000 to 6,000 cycles.
The waste container must also be emptied
after each instance of transport or shipping.
►
Pull out the waste container and empty it.
►
Re-insert the waste container.
40
7.5

Cleaning wire-holding tongs

►
Clean the wire-holding tongs with a brush.
Additional monthly maintenance:
►
Grease the holding tongs at the guide
grooves (1) of the rollers.
Figure 7.3 Wire-holding tongs, from front
Figure 7.4 Guide groove, from the side
1
2516400000/01/03.2017