Replacing Fuses; Status Menu - Weidmuller Crimpfix E Originalbetriebsanleitung

8.5

Replacing fuses

►
Make sure that the machine is switched
off.
►
Remove the power plug.
1
Figure 8.6 Opening the fuse compartment
►
Lever the fuse compartment (1) out of
the mains filter unit using a slotted
screwdriver.
►
Replace both fuses with new ones
(2 x T2AH250V).
►
Put the fuse compartment back into the
mains filter unit.
2516400000_27/02/2017
8.6

Status menu

The menu is used for displaying the status of
the inputs (0 or 1) on the machine.
►
Set stripping grade 6 (see section 5.1).
►
Switch the machine off and back on again.
►
Tap on the touch display quickly a
minimum of ten times.
(This prevents accidental activation.)
A I1 = 0
B I2 = 1
C
I3 = 1
Start: Microswitch
A
Drum position
B
Drum position
C
Drum position
D
Stop: Light barrier
E
Front flap
F
Exit the menu:
►
Press the touch display for a minimum of
2 seconds.
I4 = 0 D
I6 = 0 E
F
I7 = 1
47