Service Counter; Service Display; Switching Off The Machine; Menu Note - Weidmuller Crimpfix E Originalbetriebsanleitung

6.5

Service counter

+1 200 002
+1
Service: - 1
The total counter counts the work cycles
during the entire lifetime of the machine.
The service interval of the machine is
200,000 work cycles. The service counter
counts down instead of up; starting at
200,000. Once 200,000 work cycles have
been completed, the service counter stands
at 0. When the machine is next started,
the service notification is displayed (see
section 6.6). The service counter counts up
again. The negative prefix sign indicates that
a counting cycle has been completed.
The service technician resets the service
counter to 200,000.
6.6

Service display

When the machine is switched on, the service
display flashes. The notification is
acknowledged by tapping on the display
briefly one time.
Service display appears
--Service--
after every 200,000 work
cycles.
To maintain the machine's
performance capability for as long as
possible, you should keep to the
service intervals specified.
– Small service after 200,000 work
cycles
– Big service after 400,000 work
cycles
Refer to the Weidmüller representative
responsible for your country.
2516400000/01/03.2017
6.7
Total counter:
Number of
completed work
cycles.
Day counter
Prefix sign and
6.8
service counter

Switching off the machine

►
Switch the machine off.
When you finish the work, you should
empty the waste container and put it
back into the machine
(see section 7.4).

Menu note

The machine boasts more menus and displays
on the touch display (Figure 3.3, 4) which can
be used for troubleshooting.
See section 8.
37