Cleaning And Maintaining The Machine; Cleaning The Machine Externally; Machine Maintenance - Weidmuller Crimpfix E Originalbetriebsanleitung

7 Cleaning and maintaining the machine

7.1

Cleaning the machine externally

The machine should be freed of dust on a
regular basis.
If necessary, it may have to be cleaned
outside.
►
Make sure that the machine is switched
off.
ATTENTION
The display may become damaged!
Using unsuitable cleaning agents may
scratch or damage the display.
►
Clean the display carefully, either using
a special cleaning cloth for display
surfaces, or with a soft cloth and some
display cleaner.
Clean the surface of the machine with a damp
cloth.
If necessary, use soap-based cleaning agents.
Do not use any abrasive cleaners or solvents.
38
7.2

Machine maintenance

In order to ensure fault-free operation, the
following maintenance tasks (see section 7.3)
must be performed at the specified intervals.
WARNING
Potential risk of fatality due to
electric shock!
When working on the inside of the
machine, non-insulated parts may
be touched.
►
Switch the machine off.
►
Pull the power plug.
In order to be able to access all the
areas inside the machine easily, you
should remove the waste container
when starting maintenance work.
Remember to put it back in once work
is complete.
Keep the following ready for
maintenance work:
–
Allen key set
–
Brush and cleaning cloth
–
Lubricant
Recommended grease:
BP Energrease PR-EP 00
Recommended spray:
Teflon spray
2516400000/01/03.2017