Cleaning The Stranded Wire Fixing Unit; Check The Strippingblade; Cleaning The Interior; Lubricating The Crimping Drum - Weidmuller Crimpfix E Originalbetriebsanleitung

7.6

Cleaning the stranded wire fixing unit

Figure 7.5 Stranded wire fixing
►
Clean the fixing contour with a brush.
7.7

Check the strippingblade

Figure 7.6 Stripping unit
►
Check the blade (1).
If necessary, replace the blades
(see section 8.2).
2516400000/01/03.2017
1
7.8

Cleaning the interior

►
Remove the waste container.
►
Clean the inside of the machine with a
brush and, if necessary, with a vacuum
cleaner.
Never use compressed air
for cleaning the inside, because
otherwise small parts
(e.g. stripping residues) become
inaccessible on the inside of the
machine.
This may result in function faults
and operational stoppages.
7.9

Lubricating the crimping drum

3
Figure 7.7 Crimping drum
►
Lubricate the support (2) and bearing (3) of
the crimping drum with Teflon spray.
2
41