Loading Paper; Loading Paper Into A Paper Drawer - Canon imageRUNNER ADVANCE series Anwenderhandbuch

Loading Paper

This section describes how to load paper.

Loading Paper into a Paper Drawer

If the selected paper runs out, or the selected paper
drawer runs out of paper during printing, a screen
prompting you to load paper appears on the touch panel
display.
Follow the procedure below to load paper into the paper
drawers.
When handling paper, take care not to cut your hands
on the edges of the paper.
IMPORTANT
•
A screen prompting you to load paper also appears if
the selected paper drawer is not fully inserted into the
machine. Make sure that the paper drawer is properly
in place.
•
Do not load the following types of paper into the paper
drawers. Doing so may cause a paper jam.
-
Severely curled or wrinkled paper
-
Thin straw paper
-
Paper which has been printed on using a thermal
transfer printer
-
The reverse side of paper which has been printed on
using a thermal transfer printer
•
Fan the stack of paper well before loading it. Paper
such as thin paper, recycled paper, pre-punched paper,
heavy paper, and transparencies should be fanned
particularly well before loading it.
•
Never place paper or any other items in the empty part
of the drawer next to the paper stack. Doing so may
cause paper jams.
•
When you are printing in the Staple mode, do not
remove the output sheets that are waiting to be
stapled. (Printing and stapling resume after you clear
the paper jam.)
NOTE
•
The following paper sizes can be loaded into Paper
Drawers 1, 2, 3, and 4:
-
Paper Drawer 1: A3 and A4
-
Paper Drawer 2: A3, A4, A4R, A5R, envelopes, and
Custom size (139.7 mm x 182 mm to 304.8 mm x 457.2
mm)
-
Paper Drawers 3 and 4: A3, A4, A4R, A5R, and Custom
size (139.7 mm x 182 mm to 304.8 mm x 457.2 mm)
-
Envelopes can be loaded into Paper Drawer 2 only if
the Envelope Feeder Attachment-D1 is attached.
-
Paper Drawers 3 and 4 can only be used if the Cassette
Feeding Unit-AF1 is attached.
48 Routine Maintenance
•
For more information on the paper types that can be
loaded in Paper Drawers 1, 2, 3, and 4, see e-Manual >
Basic Operations.
•
If a message prompting you to load paper appears
during printing, the remaining prints are automatically
made after you load the correct paper. If you select a
different paper source, the remaining prints are made
after you press [OK].
•
Press [Cancel] to cancel printing.
1
Open the paper drawer.
2
1
1. Press the open button on the paper drawer in which
you want to load paper.
2. Grip the handle, and pull out the paper drawer until it
stops.
2
Prepare the paper to load.
Open the packaging for the paper, and remove the paper
stack.
NOTE
•
For high-quality printouts, use paper recommended by
Canon.
•
Before loading paper, always fan the sheets several
times, and align the edges to facilitate feeding.
3