Canon imageRUNNER ADVANCE series Anwenderhandbuch Seite 80

Q21 Can I change the screen or the order that the functions are displayed on the touch panel display when the power is turned ON?
You can change the default display that appears after the machine is turned ON using the following method. You can also change the
order that the functions are displayed or the layout.
Setting the Default Display That Appears after the Machine Is Turned ON:
1. On the control panel, press
A
2. Select the settings → press [OK].
Changing the Displayed Functions:
On the Main Menu Screen, press
function keys → press [OK].
Q22 I want to check the IP address for this machine to run the Remote UI, but I do not know how to check it.
You can check the IP address from the touch panel display of this machine.
1. On the control panel, press
A
2. Select [IPv4 Settings] or [IPv6 Settings] → [Use IPv4] or [Use IPv6] → [OK].
3. Press [IP Address Settings] or [Manual Address Settings].
Q23 Is there a way to adjust the sound heard when fax sending/receiving is complete?
You can use on the control panel to adjust the volume.
A
On the control panel, press
78 Appendix
→ [Preferences] → [Display Settings] → [Default Screen after Startup/Restoration].
→ [Main Menu Button Display Settings] → select the layout or the order to display the
→ [Preferences] → [Network] → [TCP/IP Settings].
→ to adjust the Alarm Volume and Monitor Volume → press [OK].
or
4