Inhaltszusammenfassung für Canon imageRUNNER C1028i
Seite 1
uniFLOW Secure Printing for CMFP (non-MEAP imageRUNNER) uniFLOW Secure Printing for CMFP (non-MEAP imageRUNNER) Please read this guide before operating this product. After you finish reading this guide, store it in a safe place for future reference. Lisez ce guide avant d’utiliser ce produit. Après avoir pris connaissance de son contenu, conservez-le dans un endroit sûr pour pouvoir le consulter en cas de besoin.
Seite 2
imageRUNNER C1028i/C1028iF uniFLOW Secure Printing for CMFP (non-MEAP imageRUNNER)
Seite 3
Adobe Systems Incorporated website. Considerable effort has been made to ensure that this manual is free of inaccuracies and omissions. However, as we are constantly improving our products, if you need an exact specification, please contact Canon.
Preface Thank you for purchasing the Canon imageRUNNER C1028i/C1028iF. Please read this manual thoroughly before operating the machine to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference.
Displays Used in This Manual Screen shots used in this manual may differ from actual displays depending on the machine configuration. Trademarks ® uniFLOW and MiCard are registered trademarks of NT-ware Systemprogrammierung GmbH. Other product and company names herein may be the trademarks of their respective owners.
Disclaimers The information in this document is subject to change without notice. CANON INC. MAKES NO WARRANTY OF ANY KIND WITH REGARD TO THIS MATERIAL, EITHER EXPRESS OR IMPLIED, EXCEPT AS PROVIDED HEREIN, INCLUDING WITHOUT LIMITATION, THEREOF, WARRANTIES AS TO MARKETABILITY, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR USE OR NON-INFRINGEMENT.
Managing the Machine with the uniFLOW Integration This section describes the overview of the uniFLOW integration. The uniFLOW server, a server in which the uniFLOW software is installed, detects the machine in a network and activates the uniFLOW integration in the machine. The uniFLOW server authenticates users logging in at the machine and provides the machine with setting information.
What You Can Do with the uniFLOW Integration Equipped in the machine are the functions activated by the uniFLOW server. The major functions are as follows: uniFLOW Server-based Authentication Modes and Log-in Methods You can manage the machine by limiting its use only to the users who are registered in the uniFLOW server.
Seite 10
Activation and Settings of the uniFLOW Integration The overview of the activation and settings of the uniFLOW integration is as follows: System Environment To activate the uniFLOW integration, the machine must be connected to the uniFLOW server (a server in which the uniFLOW software is installed) over a network.
Log-in Methods by the uniFLOW Integration The uniFLOW integration provides the following log-in methods: NOTE • For instructions on how to log in to the machine as the System Manager, see "Operating the Machine in System Management Mode," on p. EN-6. •...
Seite 12
Settings of Department ID and User ID Management for the uniFLOW Integration Before you use the uniFLOW integration, be sure to set the Department ID and User ID Management settings as indicated on the table below. IMPORTANT • Disable User ID Management before you use the uniFLOW integration. •...
Operating the Machine in System Management Mode The System Manager log-in procedure varies depending on the applied authentication modes provided by the uniFLOW integration. See the table below. NOTE The System Manager refers to the user who can access the System Settings of the machine.
Seite 14
Resetting the IP Address of the Machine If the message <Being set... Please wait. If the screen does not turn off after a while, contact the System Manager.> persists on the display after the machine is turned ON, the IP address of the machine may not be properly set. Resume communications between the machine and the uniFLOW server by resetting the IP address of the machine as described below.
Logging in to the Machine This section describes the operation procedures for the log-in methods provided by the uniFLOW integration. NOTE When the optional MiCard Reader is attached to the machine, you can log in and log out by holding your ID card over the MiCard Reader, regardless of the applied log-in method (except when the department ID and password is applied as the log-in method).
Seite 16
NOTE • If no password is set for the user ID, leave <Pass:> blank. • If you make a mistake when entering the user ID/password, press (Clear) ➞ enter the correct user ID/password. • If the user ID/password that you entered is incorrect, an error message will appear. ❑...
Seite 17
Entering a PIN Code Enter your PIN code to log in when the screen shown in step 1 is displayed. NOTE To log in to the machine, you must have a valid PIN code registered. For instructions on how to register a PIN code in the uniFLOW server, see the documentation included with the uniFLOW software.
Seite 18
Using the ID Card Use your ID card to log in when the screen shown in step 1 is displayed. IMPORTANT Logging-in by using the ID card is available only when the optional MiCard Reader is attached to the machine. Hold your ID card over the MiCard Reader until the screen switches to the next log-in step...
Seite 19
Entering a Department ID and Password Enter your department ID and password to log in when the screen shown in step 1 is displayed. IMPORTANT This log-in method is available only when "Authentication to the Machine" (p. EN-3) is applied as the authentication mode. NOTE To log in to the machine, you must have a valid department ID and password (if set) registered.
Seite 20
Press (Log In/Out). ❑ If a screen prompting you to select the cost center appears, select the appropriate cost center using [ ], [ ], (Scroll Wheel). • Press the left Any key to select <Parent/Sub> to move to the parent or sub level of the cost centers.
Keeping Documents Unprinted Until Logging-In (Login and Document Release) You can keep your documents unprinted until you log in to the machine or the Login and Document Release function. Your documents are printed out only when you log in at the machine. This means you can securely collect confidential documents and eliminate the problem of forgotten printouts in the machine's output trays.
Seite 22
❑ If a screen prompting you to select the cost center appears, select the appropriate cost center using [ ], [ ], (Scroll Wheel). • Press the left Any key to select <Parent/Sub> to move to the parent or sub level of the cost centers. •...
Seite 23
• The screen to select the jobs to print may not be displayed depending on the machine configuration and on the version or settings of the printer drivers or the uniFLOW software. For more information, contact your local authorized Canon dealer. • If the screen shown below appears, use [ ], [ ], or (Scroll Wheel) to select <Yes>...
Seite 24
❑ Log in to the Login and Document Release function as indicated on the screen. NOTE The screen shown left is an example of the log-in screens. For more information on the other log-in methods, see "Logging in to the Machine,"...
Seite 25
• The screen to select the jobs to print may not be displayed depending on the machine configuration and on the version or settings of the printer drivers or the uniFLOW software. For more information, contact your local authorized Canon dealer. • If the screen shown below appears, use [ ], [ ], or (Scroll Wheel) to select <Yes>...
Seite 26
imageRUNNER C1028i/C1028iF Impression Sécurisée uniFLOW pour CMFP (imageRUNNER non-MEAP)
Seite 27
Un soin particulier a été apporté à la rédaction de ce guide afin d’éviter les inexactitudes ou omissions. Toutefois, du fait de notre souci constant d’amélioration de nos produits, il est possible d’obtenir des spécifications techniques précises auprès de la société Canon.
Seite 28
Table des matières Préface ............FR-iv Présentation du guide .
Préface Nous vous remercions d’avoir acheté une machine Canon imageRUNNER C1028i/C1028iF. Nous vous invitons à lire attentivement ce guide avant toute manipulation, afin de tirer le meilleur parti des avantages offerts par la machine. Nous vous prions également de le conserver avec soin pour pouvoir le consulter en cas de besoin.
Affichages utilisées dans ce guide Selon la configuration de votre machine, il est possible que les captures d’écran figurant dans ce guide ne reflètent pas tout à fait la réalité. Marques ® uniFLOW et MiCard sont des marques déposées de NT-ware Systemprogrammierung GmbH.
électronique ou mécanique, notamment par photocopie ou enregistrement, ou par tout système de stockage ou d’extraction d’informations, sans le consentement écrit préalable de la société Canon Inc. Limites de responsabilité Les informations contenues dans ce document sont susceptibles de modification sans préavis.
Gestion de l’imprimante avec l’intégration uniFLOW Cette section présente l’intégration uniFLOW. Le serveur uniFLOW, c’est-à-dire le serveur sur lequel le logiciel uniFLOW est installé, détecte l’imprimante sur le réseau et active l’intégration uniFLOW dans l’imprimante. Le serveur uniFLOW authentifie les utilisateurs qui se connectent à l’imprimante et indique les réglages à...
Intérêts de l’intégration uniFLOW Les fonctions intégrées à la machine sont activées par le serveur uniFLOW. Voici les principales fonctions disponibles : Modes d’authentification serveur uniFLOW et méthodes de connexion Vous pouvez gérer l’imprimante en restreignant son usage aux utilisateurs enregistrés sur le serveur uniFLOW.
■ Affichage des coûts liés aux tâches de la fonction de connexion et de publication de documents à l’écran : Il est possible de régler l’imprimante de manière à afficher les coûts générés par la tâche sur l’affichage lorsqu’un utilisateur recourt à la fonction de connexion et de publication de documents de l’imprimante.
Authentification par la fonction de connexion et de publication de documents Les utilisateurs sont invités à se connecter à la fonction de connexion et de publication de documents. Dans ce cas, les utilisateurs peuvent utiliser les fonctions de l’imprimante comme les fonctions Copie ou Envoi/Fax sans s’y connecter.
Réglages de la gestion des numéros de services et des utilisateurs pour l’intégration uniFLOW Avant de pouvoir utiliser l’intégration uniFLOW, veillez à paramétrer la gestion des numéros de services et des utilisateurs comme indiqué dans le tableau suivant. IMPORTANT • Désactivez la gestion des utilisateurs avant d’activer l’intégration uniFLOW. •...
Utilisation de l’imprimante en mode gestion du système La procédure de connexion comme administrateur système varie selon le mode d’authentification appliqué lors de l’intégration uniFLOW. Pour plus d’informations, consultez le tableau ci-dessous. REMARQUE L’administrateur système désigne l’utilisateur en mesure d’accéder aux réglages système de l’imprimante.
Redéfinition de l’adresse IP de l’imprimante Si le message <Réglage en cours... Veuillez patienter. Si l’écran ne s’éteint pas au bout d’un moment, contacter admin. système.> continue d’apparaître sur l’afficheur après la mise sous tension de l’imprimante, l’adresse IP de l’imprimante peut être mal définie.
Connexion à l’imprimante Cette section décrit les procédures à suivre pour les différentes méthodes de connexion proposées par l’intégration uniFLOW. REMARQUE Si le module MiCard Reader en option est relié à l’imprimante, vous pouvez vous connecter et vous déconnecter en plaçant votre carte d’identité au-dessus du module MiCard Reader, quelle que soit la méthode de connexion définie (hormis dans le cas de l’utilisation du numéro de service et de son mot de passe).
Seite 40
Saisissez votre ID utilisateur et le mot de passe (jusqu’à 32 caractères respectivement) à l’aide du clavier à l’écran et des touches (clavier numérique). ❑ Utilisez [ ], [ ] ou (Molette de défilement) pour sélectionner <ID utilisateur:> ➞ appuyez sur [OK] ➞ saisissez votre ID utilisateur.
Seite 41
❑ Si l’écran vous invitant à spécifier un centre de coûts apparaît, sélectionnez le centre de coûts qui convient à l’aide des touches [ ], [ ] ou (Molette de défilement). • Appuyez sur la touche polyvalente gauche pour choisir <Parent/Inf> et passer au niveau du centre de coûts parent ou des niveaux inférieurs.
Saisie d’un code PIN Saisissez votre code PIN pour vous connecter lorsque l’écran illustré à l’étape 1 apparaît. REMARQUE Pour se connecter à l’imprimante, il est nécessaire de posséder un code PIN correct enregistré. Pour plus d’informations sur l’enregistrement d’un code PIN sur le serveur uniFLOW, voir la documentation accompagnant le logiciel uniFLOW.
Lorsque vous avez terminé ces opérations, appuyez sur (Log In/Out) pour vous connecter. Utilisation de la carte d’identité Votre carte d’identité vous permet de vous connecter lorsque l’écran illustré à l’étape 1 apparaît. IMPORTANT La connexion à l’aide de la carte d’identité n’est possible que si le module MiCard Reader en option est relié...
Une fois les opérations terminées, placez votre carte d’identité au-dessus du module MiCard Reader jusqu’à ce que l’écran de connexion illustré à l’étape 1 apparaisse. Vous pouvez également vous déconnecter de l’imprimante en appuyant sur (Log In/Out). Saisie du numéro de service et du mot de passe Saisissez votre numéro de service et le mot de passe correspondant pour vous connecter lorsque l’écran illustré...
REMARQUE • Si aucun mot de passe n’est défini pour le numéro de service, laissez le champ <M. passe:> vide. • En cas d’erreur de saisie du numéro de service/mot de passe, appuyez sur (Effacer) ➞ saisissez le numéro de service/mot de passe correct. •...
Suspension de l’impression de documents sans connexion (fonction de connexion et de publication de documents) Il est possible de différer l’impression des documents tant que vous n’êtes pas connecté à l’imprimante ou à la fonction de connexion et de publication de documents.
Seite 47
❑ Connectez-vous à l’imprimante comme illustré à l’écran. REMARQUE L’écran figurant à gauche est un exemple d’écran de connexion. Pour plus d’informations sur les autres méthodes de connexion, consultez « Connexion à l’imprimante », p. FR-8. ❑ Si l’écran vous invitant à spécifier un centre de coûts apparaît, sélectionnez le centre de coûts qui convient à...
Seite 48
Pour plus d’informations, contactez votre revendeur Canon agréé. • Si l’écran ci-dessous apparaît, utilisez [ ], [ ] ou (Molette de défilement) pour sélectionner <Oui>...
Seite 49
REMARQUE Vous pouvez vous déconnecter en plaçant votre carte d’identité au-dessus du module MiCard Reader (hormis dans le cas de l’utilisation du numéro de service et de son mot de passe comme méthode de connexion). ● Pour se connecter à la fonction de connexion et de publication de documents : REMARQUE Si le menu principal s’affiche au lieu de l’écran de connexion lorsque vous...
Seite 50
Pour plus d’informations, contactez votre revendeur Canon agréé. • Si l’écran ci-dessous apparaît, utilisez [ ], [ ] ou (Molette de défilement) pour sélectionner <Oui>...
Seite 51
REMARQUE Le coût total de la tâche ou des tâches s’affiche éventuellement selon le réglage utilisé. FR-20 Suspension de l’impression de documents sans connexion (fonction de connexion et de publication de documents)
Seite 52
imageRUNNER C1028i/C1028iF uniFLOW Secure Printing CMFP...
Seite 53
Reader nicht auf Ihrem System installiert ist, laden Sie die Software bitte von der Website von Adobe Systems Incorporated herunter. Bei der Erstellung dieser Handbücher und Anleitungen wurden größte Anstrengungen unternommen, um Ungenauigkeiten und Auslassungen zu vermeiden. Außerdem kann es aufgrund von Produktverbesserungen zu Abweichungen kommen. Bitte kontaktieren Sie Canon, falls Sie genaue Spezifikationen benötigen.
Seite 54
Inhalt Vorwort ............DE-iv Verwendung dieses Handbuchs.
Vorwort Wir danken Ihnen, dass Sie sich für den Canon imageRUNNER C1028i/C1028iF entschieden haben. Bevor Sie mit dem System arbeiten, lesen Sie dieses Handbuch bitte sorgfältig. So informieren Sie sich über den optimalen Einsatz der Funktionen für Ihre speziellen Anforderungen. Bewahren Sie das Handbuch dann immer als Nachschlagewerk in der Nähe des Systems auf.
Anzeigen in diesem Handbuch Je nach Systemkonfiguration können die in diesem Handbuch verwendeten Screenshots von den tatsächlichen Anzeigen abweichen. Marken ® uniFLOW und MiCard sind eingetragene Markenzeichen der NT-ware Systemprogrammierung GmbH. Andere Firmen- oder Produktnamen, die in diesem Handbuch verwendet werden und nicht in dieser Liste erwähnt sind, können Warenzeichen der entsprechenden Firmen sein.
Copyright 2014 Canon Inc. Kein Teil dieser Veröffentlichung darf ohne die vorherige schriftliche Genehmigung von Canon Inc. in irgendeiner Form oder auf irgendeine Weise, elektronisch oder mechanisch, einschließlich Fotokopien und Aufzeichnungen, oder durch ein Informationsspeicher- oder Abfragesystem reproduziert oder übertragen werden.
Verwalten des Systems mit der uniFLOW Integration Dieser Abschnitt bietet einen Überblick über die uniFLOW Integration. Der uniFLOW Server, ein Server, auf dem die uniFLOW Software installiert ist, erkennt das System in einem Netzwerk und aktiviert die uniFLOW Integration beim System.
So können Sie die uniFLOW Integration nutzen Das System ist mit den Funktionen ausgestattet, die durch den uniFLOW Server aktiviert wurden. Dies sind die Hauptfunktionen: Serverbasierte uniFLOW Authentifizierungsmodi und Login-Verfahren Sie können das System verwalten, indem Sie die Verwendung auf die Anwender beschränken, die beim uniFLOW Server registriert sind.
■ Anzeigen der Kosten für Login- und Dokumentfreigabeaufträge auf dem Bildschirm: Sie können das System so einstellen, dass die berechneten Kosten für den Auftrag im Display angezeigt werden, wenn der Anwender die Login- und Dokumentfreigabefunktion beim System nutzt. Weitere Informationen zu den Kostenstellen finden Sie in der Dokumentation im Lieferumfang der uniFLOW Software.
Authentifizierung bei der Login- und Dokumentfreigabefunktion Die Anwender werden aufgefordert, sich bei der Login- und Dokumentfreigabefunktion anzumelden. Dies bedeutet, dass die Anwender die Funktionen des Systems, wie die Kopieren- oder Senden/Fax-Funktionen, nutzen können, ohne sich beim System anzumelden. Stattdessen müssen sich die Anwender nur authentifizieren, wenn sie die Login- und Dokumentfreigabefunktion nutzen.
Seite 62
Einstellungen der Abteilungs-ID- und der Anwender-ID-Verwaltung für die uniFLOW Integration Bevor Sie die uniFLOW Integration nutzen, müssen Sie die Einstellungen für die Abteilungs-ID- und die Anwender-ID-Verwaltung vornehmen, wie in der Tabelle unten aufgeführt. WICHTIG • Deaktivieren Sie die Anwender-ID-Verwaltung, bevor Sie die uniFLOW Integration nutzen.
Betrieb des Systems im Systemverwaltungsmodus Der Anmeldevorgang für den Systemmanager variiert abhängig von den durch die uniFLOW Integration verwendeten Authentifizierungsmodi. Siehe Tabelle unten. HINWEIS Der Begriff Systemmanager bezieht sich auf den Benutzer, der auf die Systemeinstellungen des Systems zugreifen kann. Authentifizierungsverfahren Beschreibung (S.
Zurücksetzen der IP-Adresse des Systems Wenn die Meldung <Diese Anwendung ist noch nicht richtig konfiguriert. Systemadministrator benachrichtigen.> dauerhaft im Display angezeigt wird, nachdem das System eingeschaltet wurde, ist möglicherweise die IP-Adresse des Systems nicht ordnungsgemäß eingerichtet. Stellen Sie die Kommunikation zwischen dem System und dem uniFLOW Server wieder her, indem Sie die IP-Adresse des Systems wie unten beschrieben zurücksetzen.
Anmelden beim System Dieser Abschnitt beschreibt die Bedienschritte für die Login-Verfahren, die durch die uniFLOW Integration bereitgestellt werden. HINWEIS Wenn der optionale MiCard Reader am System angebracht ist, können Sie sich an- und abmelden, indem Sie Ihre ID-Karte über den MiCard Reader halten, unabhängig vom verwendeten Login-Verfahren (außer wenn die Abteilungs-ID und das Passwort als Login-Verfahren angewendet werden).
Seite 66
Geben Sie Ihre Anwender-ID und das Passwort (mit jeweils bis zu 32 Zeichen) über die Bildschirmtastatur und (numerische Tasten) ein. ❑ Markieren Sie mit [ ], [ ] oder (Wählrad) die Option <Anwender ID:> ➞ betätigen Sie [OK] ➞ geben Sie Ihre Anwender-ID ein.
Seite 67
❑ Wenn ein Bildschirm erscheint, in dem Sie zur Auswahl der Kostenstelle aufgefordert werden, wählen Sie mit [ ], [ ] oder (Wählrad) die entsprechende Kostenstelle. • Betätigen Sie die linke Funktionstaste zur Auswahl von <Haupt/Neben>, um zu den über- oder untergeordneten Ebenen der Kostenstellen zu wechseln.
Eingeben eines PIN-Codes Geben Sie Ihren PIN-Code ein, um sich anzumelden, wenn der in Schritt 1 dargestellte Bildschirm angezeigt wird. HINWEIS Um sich beim System anzumelden, müssen Sie über einen gültigen PIN-Code verfügen, der registriert ist. Anleitungen zur Registrierung eines PIN-Codes beim uniFLOW Server finden Sie in der Dokumentation im Lieferumfang der uniFLOW Software.
Wenn Sie alle Vorgänge abgeschlossen haben, betätigen Sie (Log In/Out), um sich abzumelden. Verwenden der ID-Karte Verwenden Sie Ihre ID-Karte, um sich anzumelden, wenn der in Schritt 1 dargestellte Bildschirm angezeigt wird. WICHTIG Die Anmeldung über die ID-Karte ist nur verfügbar, wenn der optionale MiCard Reader am System angebracht ist.
Wenn Sie alle Vorgänge beendet haben, halten Sie Ihre ID-Karte über den MiCard Reader, bis der in Schritt 1 dargestellte Anmeldebildschirm angezeigt wird. Sie können sich auch beim System abmelden, indem Sie (Log In/Out) bestätigen. Eingeben einer Abteilungs-ID und eines Passworts Geben Sie Ihre Abteilungs-ID und ein Passwort ein, um sich anzumelden, wenn der in Schritt 1 dargestellte Bildschirm angezeigt wird.
Seite 71
HINWEIS • Wenn für die Abteilungs-ID kein Passwort festgelegt wurde, lassen Sie <Passwort:> leer. • Wenn Sie sich bei der Eingabe der Abteilungs-ID/des Passworts geirrt haben sollten, (Löschen) ➞ geben Sie die richtige Abteilungs-ID/das richtige betätigen Sie Passwort ein. • Wenn die eingegebene Abteilungs-ID/das eingegeben Passwort falsch ist, wird eine Fehlermeldung angezeigt.
Ausdrucken von Dokumenten bei der Anmeldung (Login und Dokumentfreigabe) Sie können Ihre Dokumente so lange unausgedruckt lassen, bis Sie sich beim System oder der Login- und Dokumentfreigabefunktion anmelden. Ihre Dokumente werden nur ausgedruckt, wenn Sie sich beim System anmelden. Dies bedeutet, dass Sie vertrauliche Dokumente sicher sammeln können und keine vergessenen Ausdrucke im Ausgabefach des Systems verbleiben.
Seite 73
❑ Melden Sie sich entsprechend der auf dem Bildschirm angezeigten Aufforderung beim System an. HINWEIS Der links dargestellte Bildschirm ist ein Beispiel des Anmeldebildschirms. Weitere Informationen zu den anderen Login-Verfahren finden Sie unter „Anmelden beim System“, auf S. DE-8. ❑ Wenn ein Bildschirm erscheint, in dem Sie zur Auswahl der Kostenstelle aufgefordert werden, wählen Sie mit [ ],...
Seite 74
Gerätekonfiguration und der Version oder den Einstellungen der Druckertreiber oder der uniFLOW-Software nicht angezeigt. Ausführliche Informationen erhalten Sie von Ihrem autorisierten Canon-Händler vor Ort. • Wenn der unten dargestellte Bildschirm angezeigt wird, wählen Sie mit [ ], [ ] oder (Wählrad) die Option <Ja>...
Seite 75
HINWEIS Sie können sich beim System auch abmelden, indem Sie Ihre ID-Karte über den optionalen MiCard Reader halten (außer wenn die Abteilungs-ID und das Passwort als Login-Verfahren genutzt werden). ● So melden Sie sich bei der Login- und Dokumentfreigabefunktion an: HINWEIS Wenn das Hauptmenü...
Seite 76
❑ Wenn ein Bildschirm erscheint, in dem Sie zur Auswahl der Kostenstelle aufgefordert werden, wählen Sie mit [ ], [ ] oder (Wählrad) die entsprechende Kostenstelle. • Betätigen Sie die linke Funktionstaste zur Auswahl von <Haupt/Neben>, um zu den über- oder untergeordneten Ebenen der Kostenstellen zu wechseln.
Seite 77
Gerätekonfiguration und der Version oder den Einstellungen der Druckertreiber oder der uniFLOW-Software nicht angezeigt. Ausführliche Informationen erhalten Sie von Ihrem autorisierten Canon-Händler vor Ort. • Wenn der unten dargestellte Bildschirm angezeigt wird, wählen Sie mit [ ], [ ] oder (Wählrad) die Option <Ja>...
Seite 78
imageRUNNER C1028i/C1028iF uniFLOW Secure Printing per CMFP (non-MEAP imageRUNNER)
Seite 79
Per la stesura del presente manuale è stato fatto uno sforzo considerevole per evitare imprecisioni o omissioni. Tuttavia, poiché i prodotti sono in continua evoluzione, si consiglia di rivolgersi a Canon nel caso in cui fossero necessarie informazioni specifiche sul prodotto.
Seite 80
Indice Prefazione........... . . IT-iv Come utilizzare il presente manuale .
Prefazione Vi ringraziamo per aver acquistato Canon imageRUNNER C1028i/C1028iF. Leggere attentamente il manuale prima di utilizzare la macchina, in modo da familiarizzare con l’apparecchiatura e poter sfruttare al meglio le sue molteplici funzioni. Terminata la lettura, conservare il manuale per eventuali consultazioni future.
Schermate utilizzate nel manuale Le schermate utilizzate nel manuale possono differire da quelle effettive in base alla configurazione dell’apparecchiatura. Marchi di fabbrica ® uniFLOW e MiCard sono marchi di fabbrica registrati di NT-ware Systemprogrammierung GmbH. Gli altri nomi di prodotto e di azienda indicati nel manuale possono essere marchi di fabbrica dei rispettivi proprietari.
RIPORTATO, INCLUSE E SENZA ALCUNA ESCLUSIONE, LE GARANZIE DI VENDIBILITÀ, COMMERCIABILITÀ, APPLICAZIONE PER UN PARTICOLARE UTILIZZO O DI NON VIOLAZIONE DI BREVETTI O ALTRO. CANON INC. NON POTRÀ ESSERE RITENUTA RESPONSABILE DI DANNI DIRETTI, ACCIDENTALI O CONSEGUENTI, NÉ DI PERDITE O SPESE RISULTANTI DALL’USO DEL PRESENTE MATERIALE.
Gestione della macchina con integrazione in uniFLOW La presente sezione mostra una panoramica dell’integrazione in uniFLOW. Il server uniFLOW, un server su cui è stato installato il software uniFLOW, rileva la macchina all’interno di una rete e attiva l’integrazione in uniFLOW della macchina. Il server uniFLOW autentica l’accesso degli utenti alla macchina e fornisce alla macchina informazioni sulle impostazioni.
Azioni possibili grazie all’integrazione in uniFLOW La macchina dispone delle funzioni attivate dal server uniFLOW. Le funzioni principali sono le seguenti: Modi di autenticazione e metodi di accesso basati sul server uniFLOW È possibile gestire la macchina limitando il suo utilizzo ai soli utenti registrati sul server uniFLOW.
■ Visualizzazione del costo sulla schermata per i lavori eseguiti con la funzione Accesso e rilascio dei documenti: È possibile impostare la macchina in modo che visualizzi il costo calcolato per il lavoro sul display quando un utente utilizza la funzione Accesso e rilascio dei documenti sulla macchina.
Autenticazione per la funzione Accesso e rilascio dei documenti Agli utenti viene chiesto di accedere alla funzione Accesso e rilascio dei documenti. Ciò significa che gli utenti possono utilizzare le funzioni della macchina, per esempio la funzione di Copiatura o di Invio e Fax, senza effettuare l’accesso alla macchina.
Impostazioni di Gestione ID divisione e Gestione ID utente per l’integrazione in uniFLOW Prima di utilizzare l’integrazione in uniFLOW, accertarsi che le impostazioni di Gestione ID divisione e Gestione ID utente siano impostate come indicato nella tabella di seguito. IMPORTANTE •...
Funzionamento della macchina nel Modo gestione sistema La procedura di accesso del Gestore sistema varia a seconda del modo di autenticazione selezionato tra quelli offerti dall’integrazione in uniFLOW. Vedere la tabella sottostante. NOTA Il Gestore sistema si riferisce all’utente che può accedere alle Impostazioni sistema della macchina.
Azzeramento dell’indirizzo IP della macchina Se il messaggio <Impostaz. in corso... Attendere. Se lo schermo non si spegne dopo alcuni istanti, mettersi in contatto con il gestore del sistema.> continua a essere visualizzato sul display dopo che la macchina è stata accesa, è possibile che l’indirizzo IP della macchina non sia stato impostato correttamente.
Effettuare l’accesso alla macchina Questa sezione descrive le procedure a cui attenersi con i metodi di accesso messi a disposizione dall’integrazione in uniFLOW. NOTA Quando l’unità opzionale MiCard Reader è collegata alla macchina, è possibile accedere e disconnettersi tenendo il documento di identità sul MiCard Reader, indipendentemente dal metodo di accesso applicato (tranne quando è...
Seite 92
Inserire l’ID utente e la password (fino a un massimo di 32 caratteri per ciascuno) utilizzando la tastiera software e (tasti numerici). ❑ Utilizzare [ ], [ ] o (Rotella di scorrimento) per selezionare <ID utente:> ➞ premere [OK] ➞ immettere il proprio ID utente.
Seite 93
❑ Se viene visualizzata una schermata che richiede di selezionare un centro di costo, selezionare il centro di costo appropriato utilizzando [ ], [ ] o (Rotella di scorrimento). • Premere il tasto funzione sinistro per selezionare <Princ./Second.> e per spostarsi al livello principale o secondario dei centri di costo.
Inserimento di un codice PIN Quando viene visualizzata la schermata illustrata al punto 1, inserire il proprio codice PIN per effettuare l’accesso. NOTA Per effettuare l’accesso alla macchina, è necessario disporre di un codice PIN valido e registrato. Per indicazioni su come registrare un codice PIN sul server uniFLOW, vedere la documentazione in dotazione con il software uniFLOW.
Una volta completate le operazioni, premere (Log In/Out) per disconnettersi. Utilizzo di un documento d’identità Quando viene visualizzata la schermata illustrata al punto 1, utilizzare il proprio documento d’identità per effettuare l’accesso. IMPORTANTE L’accesso tramite documento d’identità è possibile soltanto quando l’unità opzionale MiCard Reader è...
Una volta completate le operazioni, tenere il documento d’identità sull’unità MiCard Reader fino a visualizzare la schermata di accesso illustrata al punto 1. È possibile anche disconnettersi dalla macchina premendo (Log In/Out). Immissione di un ID divisione e password Quando viene visualizzata la schermata illustrata al punto 1, inserire ID divisione e password per effettuare l’accesso.
Seite 97
Premere (Log In/Out). ❑ Se viene visualizzata una schermata che richiede di selezionare un centro di costo, selezionare il centro di costo appropriato utilizzando [ ], [ ] o (Rotella di scorrimento). • Premere il tasto funzione sinistro per selezionare <Princ./Second.> e per spostarsi al livello principale o secondario dei centri di costo.
Conservare i documenti senza stamparli finché non viene effettuato l’accesso (Accesso e rilascio dei documenti) È possibile conservare i documenti senza stamparli finché l’utente non effettua l’accesso alla macchina o alla funzione Accesso e rilascio dei documenti. I documenti vengono stampati solo dopo che l’utente ha effettuato l’accesso. Questo consente di gestire con la massima sicurezza documenti riservati, inoltre elimina il problema di documenti stampati e dimenticati nei vassoi d’uscita della macchina.
Seite 99
❑ Accedere alla macchina come indicato sulla schermata. NOTA La schermata illustrata sulla sinistra è un esempio di schermata di accesso. Per ulteriori informazioni su altri metodi di accesso, vedere “Effettuare l’accesso alla macchina”, a p. IT-8. ❑ Se viene visualizzata una schermata che richiede di selezionare un centro di costo, selezionare il centro di costo appropriato utilizzando [ ], [ ] o...
Seite 100
Per ulteriori informazioni, mettersi in contatto con il rivenditore autorizzato Canon di zona. • Se viene visualizzata la schermata seguente, utilizzare [ ], [ ] o (Rotella di scorrimento) per selezionare <Sì>...
Seite 101
NOTA È inoltre possibile disconnettersi dalla macchina tenendo il documento di identità sull’unità opzionale MiCard Reader (tranne quando si applica il metodo di accesso ID divisione e password). ● Per effettuare l’accesso alla funzione Accesso e rilascio dei documenti: NOTA Se, all’accensione della macchina o alla disattivazione del modo riposo, viene visualizzato il menu principale invece di una schermata di accesso, accedere alla funzione Accesso e rilascio dei documenti attenendosi alla procedura descritta...
Seite 102
❑ Se viene visualizzata una schermata che richiede di selezionare un centro di costo, selezionare il centro di costo appropriato utilizzando [ ], [ ] o (Rotella di scorrimento). • Premere il tasto funzione sinistro per selezionare <Princ./Second.> e per spostarsi al livello principale o secondario dei centri di costo.
Seite 103
Per ulteriori informazioni, mettersi in contatto con il rivenditore autorizzato Canon di zona. • Se viene visualizzata la schermata seguente, utilizzare [ ], [ ] o (Rotella di scorrimento) per selezionare <Sì>...
Seite 104
imageRUNNER C1028i/C1028iF Impresión Segura de uniFLOW para CMFP (imageRUNNER No-MEAP)
Seite 105
Adobe Systems Incorporated. Se ha hecho un gran esfuerzo para evitar inexactitudes y omisiones en este manual. No obstante, debido al continuo perfeccionamiento de nuestros productos, consulte a Canon si necesita una especificación exacta.
Seite 106
Índice Prefacio............ES-iv Cómo utilizar este manual .
Prefacio Gracias por adquirir la Canon imageRUNNER C1028i/C1028iF. Antes de utilizar este producto, lea atentamente el manual para familiarizarse con sus características y aprovechar al máximo sus múltiples funciones. Después de leer este manual, guárdelo en un lugar seguro para futuras consultas.
Pantallas utilizadas en este manual Las capturas de pantalla utilizadas en este manual pueden ser distintas a las pantallas reales, según la configuración del equipo. Marcas registradas ® uniFLOW y MiCard son marcas comerciales registradas de NT-ware Systemprogrammierung GmbH. El resto de nombres de productos y compañías aquí mencionados son marcas comerciales de sus respectivos propietarios.
CONTRATO, INCLUIDAS LAS GARANTÍAS DE COMERCIABILIDAD, IDONEIDAD PARA UN PROPÓSITO O USO CONCRETO O CONTRA EL INCUMPLIMIENTO DE PATENTES, AUNQUE NO LIMITADAS A ÉSTAS. CANON INC. NO ASUME NINGUNA RESPONSABILIDAD EN CUANTO A LOS DAÑOS DIRECTOS, FORTUITOS O RESULTANTES, INDEPENDIENTEMENTE DE LA NATURALEZA DE ÉSTOS, O EN CUANTO A LAS PÉRDIDAS O GASTOS QUE SE DERIVEN...
Administrar el equipo con la integración de uniFLOW Esta sección describe de manera general la integración de uniFLOW. El servidor de uniFLOW, un servidor en el que está instalado el software uniFLOW, detecta el equipo en una red y activa la integración de uniFLOW en el equipo. El servidor de uniFLOW autentica a los usuarios que inicien sesión en el equipo y proporciona al equipo información sobre opciones.
Funciones de la integración de uniFLOW El equipo cuenta con las funciones activadas por el servidor de uniFLOW. Las funciones más importantes son: Métodos de inicio de sesión y modos de autenticación basada en servidor de uniFLOW Puede gestionar el equipo limitando su empleo sólo a los usuarios que estén guardados en el servidor de uniFLOW.
■ Mostrar el coste de los trabajos de inicio de sesión y publicación de documentos en la pantalla: Puede establecer que el equipo muestre el coste calculado para el trabajo en la pantalla cuando un usuario utilice la función de inicio de sesión y publicación de documentos en el equipo.
Autenticación para la función de inicio de sesión y publicación de documentos Se pide a los usuarios que inicien sesión en la función de inicio de sesión y publicación de documentos. Esto significa que los usuarios pueden usar las funciones del equipo, como las funciones de Enviar/Fax o Copiar, sin iniciar sesión en el equipo.
Opciones de gestión de ID de usuarios e ID de departamentos para la integración de uniFLOW Antes de usar la integración de uniFLOW, asegúrese de establecer las opciones de gestión de ID de usuarios e ID de departamentos tal como se indica en la siguiente tabla.
Manejar el equipo en el modo Administración del sistema El procedimiento de inicio de sesión del administrador del sistema varía dependiendo de los modos de autenticación aplicados facilitados por la integración de uniFLOW. Consulte la siguiente tabla. NOTA El administrador del sistema hace referencia al usuario que puede acceder a las opciones de sistema del equipo.
Restablecimiento de la dirección IP del equipo Si el mensaje <Configurando... Espere, por favor. Si la pantalla no se apaga en breve, póngase en contacto con el administrador del sistema.> sigue apareciendo en la pantalla después de encender el equipo, puede que la dirección IP del equipo no esté...
Inicio de sesión en el equipo Esta sección describe los procedimientos de las operaciones correspondientes a los métodos de inicio de sesión facilitados por la integración de uniFLOW. NOTA Si el MiCard Reader opcional está instalado en el equipo, puede iniciar y cerrar sesión pasando la tarjeta de ID sobre el MiCard Reader, independientemente del método de inicio de sesión aplicado (excepto cuando se establece como método de inicio de sesión aquel en el que se utilizan el ID de departamento y la contraseña).
Seite 118
Introduzca su combinación de ID de usuario y contraseña (hasta 32 caracteres respectivamente) utilizando el teclado de software (teclas numéricas). ❑ Use [ ], [ ] o (Rueda de desplazamiento) para seleccionar <ID de usuario:> ➞ pulse [OK] ➞ introduzca su ID de usuario.
Seite 119
❑ Si aparece una pantalla solicitándole que seleccione el centro de costes, seleccione el centro de costes correspondiente por medio de [ ], [ ] o (Rueda de desplazamiento). • Pulse la tecla de selección izquierda para seleccionar <Princip/Secund> para desplazarse al nivel principal o secundario de los centros de costes.
Introducción de un código PIN Introduzca su código PIN para iniciar sesión cuando aparezca la pantalla mostrada en el paso 1. NOTA Para iniciar sesión en el equipo, debe tener guardado un código PIN válido. Para obtener instrucciones sobre cómo guardar un código PIN en el servidor de uniFLOW, consulte la documentación incluida con el software uniFLOW.
Cuando haya completado sus operaciones, pulse (Log In/Out) para cerrar sesión. Uso de la tarjeta de ID Use su tarjeta de ID para iniciar sesión cuando aparezca la pantalla mostrada en el paso 1. IMPORTANTE El inicio de sesión mediante tarjeta de ID sólo está disponible cuando el MiCard Reader opcional está...
Cuando haya completado sus operaciones, pase su tarjeta de ID sobre el MiCard Reader hasta que aparezca la pantalla de inicio de sesión mostrada en el paso 1. También puede cerrar sesión en el equipo pulsando (Log In/Out). Introducción de un ID de departamento y una contraseña Introduzca su ID de departamento y su contraseña para iniciar sesión cuando aparezca la pantalla mostrada en el paso 1.
Seite 123
NOTA • Si no hay ninguna contraseña establecida para el ID de departamento, deje en blanco <Contraseña:>. • Si comete un error al introducir el ID de departamento/la contraseña, pulse (Borrar) ➞ introduzca el ID de departamento/la contraseña correctos. • Si el ID de departamento/la contraseña que introdujo son incorrectos, aparecerá un mensaje de error.
No imprimir documentos hasta que se inicie sesión (función de inicio de sesión y publicación de documentos) Puede evitar que se impriman sus documentos hasta que inicie sesión en el equipo o la función de inicio de sesión y publicación de documentos. Sus documentos sólo se imprimen cuando inicia sesión en el equipo.
Seite 125
❑ Inicie sesión en el equipo tal como se indica en la pantalla. NOTA La pantalla que aparece a la izquierda es un ejemplo de pantalla de inicio de sesión. Para obtener más información sobre los demás métodos de inicio de sesión, consulte “Inicio de sesión en el equipo”, en la pág.
Seite 126
Para obtener más información, póngase en contacto con su distribuidor oficial Canon local. • Si aparece la pantalla que se indica a continuación, use [ ], [ ] o (Rueda de desplazamiento) para seleccionar <Sí>...
Seite 127
NOTA También puede cerrar sesión en el equipo pasando la tarjeta de ID sobre el MiCard Reader opcional (excepto cuando se establece como método de inicio de sesión aquel en el que se utilizan el ID de departamento y la contraseña). ●...
Seite 128
❑ Si aparece una pantalla solicitándole que seleccione el centro de costes, seleccione el centro de costes correspondiente por medio de [ ], [ ] o (Rueda de desplazamiento). • Pulse la tecla de selección izquierda para seleccionar <Princip/Secund> para desplazarse al nivel principal o secundario de los centros de costes.
Seite 129
Para obtener más información, póngase en contacto con su distribuidor oficial Canon local. • Si aparece la pantalla que se indica a continuación, use [ ], [ ] o (Rueda de desplazamiento) para seleccionar <Sí>...
Seite 130
30-2, Shimomaruko 3-chome, Ohta-ku, Tokyo 146-8501, Japan CANON MARKETING JAPAN INC. 16-6, Konan 2-chome, Minato-ku, Tokyo 108-8011, Japan CANON U.S.A., INC. One Canon Park, Melville, NY 11747, U.S.A. CANON EUROPA N.V. Bovenkerkerweg 59, 1185 XB Amstelveen, The Netherlands CANON CHINA CO. LTD.