Canon imageRUNNER ADVANCE series Anwenderhandbuch Seite 79

Q10 The content of the reverse side appears on the copies.
You can erase the background colour of the original and prevent the original image on the reverse side of thin originals from appearing
on the copies by using [Background Density].
A
1. On the Main Menu Screen, press [Copy] → [Options] → [Density].
2. Press [Background Density] → [Auto] or [Adjust].
Q11 Can I scan an original loaded in the machine and save it to a computer?
It is possible if you are using Windows. Install the Network ScanGear Driver in your computer, and then switch the network scan
function to online.
To Install the Driver:
A
Install the driver using the UFR II User Software CD-ROM that comes with the machine.
To Switch the Network Scan Function to Online:
On the Main Menu Screen, press [Scanner] → [Online].
Q12 Can I make copies or send a facsimile of different size originals at the same time?
Use the Different Size Originals mode.
A
On the Main Menu Screen, press [Copy] or [Fax] → [Options] → [Different Size Originals].
Q13 Can I output paper to a different tray according to the function?
You can set the output tray for each function and set priorities for outputting paper.
A 1. On the control panel, press
2. Press [Output Tray Settings] → set the output and priority settings for Tray A/B/C → press [OK].
Q14 How can I manage documents that failed to be forwarded?
You can specify how to manage jobs that failed to be forwarded using the following method.
A 1. On the control panel, press
2. Press [Handle Files with Forwarding Errors] → select how to manage the forwarding errors → press [OK].
Q15 How do I print the data received from specific destinations only?
You can set the Store/Print Received File mode in Forwarding Settings to print the data received from specific destinations only.
1. On the control panel, press
A
2. Press [Forwarding Settings] → [Register] → specify the destinations in [Conditions].
3. Set <Store/Print Received File> to 'On' → press [OK].
Q16 What is the model number of the staple cartridge for the finisher or the stamp ink cartridge for the feeder?
The model numbers of the consumables for the feeder and finisher are as follows:
A Stamp Ink Cartridge-C1 (for the Color Image Reader Unit-G1) / Staple-J1 (for the Staple Finisher-M1, Booklet Finisher-M1, and Inner
Finisher-F1) / Staple Cartridge-D2, Staple Cartridge-D3 (for the Booklet Finisher-M1)
Q17 The touch panel display has become completely black.
The main power has not been turned ON, or the machine may have entered the Auto Sleep mode to save energy. Follow the procedure
below.
Turning the main power ON:
1. Check whether the power plug is firmly inserted into the outlet.
A
2. Open the main power switch cover located on the right side of the machine and switch the main power switch to the "I" side to
turn the power ON.
Recovering from the Auto Sleep mode:
On the control panel, press
Q18 I have just sent an important document via facsimile. Can I check to make sure that it was sent correctly?
You can check the send job status from the Status Monitor/Cancel screen
A
On the Main Menu Screen, press [Status Monitor/Cancel] → [Send] → [Log].
Q19 Can I restrict the number of colour copies/prints?
If Department ID Management is used, you can restrict the colour output within groups.
1. On the control panel, press
2. Press [On] → [Register PIN] → [Register].
A
3. Enter the Department ID and PIN → press [OK].
4. Press [Turn Limits On/Off and Set Page Limits] → specify the page limit settings → press [OK].
Q20 Can I change the language displayed on the touch panel display?
You can change the language displayed using the following method.
1. On the control panel, press
A
2. Press [On] → [OK] → [Language/Keyboard Switch].
3. Select the language to display → press [OK].
4
→ [Function Settings] → [Common] → [Paper Output Settings].
→ [Function Settings] → [Receive/Forward] → [Common Settings].
→ [Function Settings] → [Receive/Forward] → [Common Settings].
.
→ [Management Settings] → [User Management] → [Department ID Management].
→ [Preferences] → [Display Settings] → [Language/Keyboard Switch On/Off ].
Appendix 77