Accessing Stored Files
This section describes the flow of basic Access Stored Files operations. The procedure for printing files stored in
memory media is used here as an example.
1
Selecting Function
●
Select [Access Stored Files] from
the Main Menu screen.
2
Select Storage
●
Specify the storage location for
the file.
3
Select File
●
Select the file → press [Print].
4
Start Printing
●
Press [Start Printing].
•
If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/PIN). If the
Copy Card Reader-F1 is attached, first insert a control card.
•
If a login service, such as Department ID Management or SSO-H has been set, press
44
Flow of Basic Operations
•
Press [Access Stored Files].
•
Select [Memory Media] from the Storage
Selection screen.
As an example, this procedure describes how to print
files stored in memory media.
•
Select the file.
You can set various print settings. For more
information, see e-Manual > Access Stored Files.
(Log In/Out) to log out.
•
Select the desired memory media.
•
Press [Print].
2