•
If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/PIN). If the
Copy Card Reader-F1 is attached, first insert a control card.
•
If a login service, such as Department ID Management or SSO-H has been set, press
•
To use memory media, specify the following settings in advance.
1. Press
.
2. Press [Preferences] → [Display Settings] → [Store Location Display Settings].
3. Select [On] for <Memory Media>.
4. Press [OK].
•
To save the scanned data to memory media, connect a USB memory to the USB port.
•
For information on the supported memory media, see e-Manual > Scan and Store.
•
To access the Network (Advanced Space), see e-Manual > Scan and Store.
2
(Log In/Out) to log out.
Flow of Basic Operations
43