Network Environment; Hardware Specifications; Software Specifications; Printer Settings - Canon imageRUNNER ADVANCE series Anwenderhandbuch

Network Environment

■

Hardware Specifications

●
Network Interface
■
●

Software Specifications

TCP/IP
IPX/SPX
AppleTalk

Printer Settings

■
Software Specifications
●
Command Language
Resident Fonts
Printable Area
4
10Base-T/100Base-TX/1000Base-T (RJ-45)
Protocol Supported
Frame type: Ethernet II
Print applications: LPD/Raw/IPP/IPPS/FTP/WSD/SMB
Frame type: Ethernet II/Ethernet 802.2/Ethernet 802.3/Ethernet SNAP/Auto Detect
Print applications: Bindery PServer/NDS PServer/RPrinter/NPrinter
Frame type: Ethernet SNAP
Print application: PAP (Printer Access Protocol)
PCL: 93 Scalable fonts, 2 OCR fonts, and 10 Bitmap fonts
PS: 136 Scalable fonts
PCL5c, PCL6: Reduced to 4.23 mm from the top, bottom, left, and right edges of the paper.
PostScript 3: Reduced to 4 mm from the top, bottom, left, and right edges of the paper.
•
With 320 x 450 mm (SRA3) size paper, you cannot print in the areas 4 mm from the top and bottom
edges of the paper and 7.5 mm from the left and right edges of the paper.
•
When printing in the 0 mm mode (apart from 320 mm x 450 mm (SRA3)), the upper margin
becomes 4 mm, the lower margin becomes 2.5 mm, and the side margins both become 2.5 mm. The
printable area is enlarged.
•
When printing in the 0 mm mode (320 mm x 450 mm (SRA3)), the upper margin becomes 4 mm,
the lower margin becomes 2.5 mm, and the side margins both become 7.5 mm. The printable area
is enlarged.
PCL5c, PCL6, PostScript 3
Appendix 75