How To Make A Copy - Canon imageRUNNER ADVANCE series Anwenderhandbuch

How to Make a Copy

This section describes the flow of basic copy operations. An optional product is required to use the Copy function.
1
Placing Originals
●
Place the original on the feeder
or the platen glass.
2
Selecting Function
●
Select [Copy] from the Main
Menu screen.
•
Press [Copy].
3
Setting the Number of Copies
●
Enter the number of copies.
4
Start Copying
●
After specifying the settings,
press .
•
If a log in screen for Department ID Management or SSO-H appears, you must enter the applicable authentication information (ID, password/PIN). If the
Copy Card Reader-F1 is attached, first insert a control card.
•
If a login service, such as Department ID Management or SSO-H has been set, press
2
Placing originals in the feeder
•
Adjust the slide guides to fit the size of your
originals. Neatly place your originals with the
side to be copied face up.
•
Copy Basic Features Screen is displayed.
•
Press the numeric keys to enter the desired copy
quantity (1 to 999).
•
Press .
(Log In/Out) to log out.
Placing originals on the platen glass
•
Open the feeder/platen cover.
•
Place your originals face down.
You can set various copying functions. For more
information, see e-Manual > Copy.
Flow of Basic Operations 39