Control Panel And Touch Panel Display - Canon imageRUNNER ADVANCE series Anwenderhandbuch

Control Panel and Touch Panel Display

1
19
18
17 16
[Main Menu]
Press to display the Main Menu screen. Use each function
by selecting it from the Main Menu screen.
Touch Panel Display
The settings screen for each function is shown on this
display. Six function keys are displayed by default.
Numeric keys
Press to enter numerical values.
Energy Saver key
Press to set or cancel the Sleep mode. Lights when the
machine enters the Sleep mode.
Settings/Registration key
Press to specify settings/registration.
Counter Check key
Press to display the copy and print count totals on the
touch panel display.
Stop key
Press to stop a job in progress, such as a scan, copy, or fax
(scanning only) job.
Edit Pen
Use when operating the touch panel display, such as to
enter characters.
Start key
Press to start an operation.
Main Power Indicator
Lights when the main power is turned ON.
2
2
Error Indicator
Flashes or lights if there is an error in the machine.
When the Error indicator flashes, follow the instructions
that appear on the touch panel display. When the Error
indicator maintains a steady red light, contact your local
authorized Canon dealer.
Processing/Data Indicator
Flashes or blinks green when the machine is performing
operations, and maintains a steady green light when fax
data is stored in memory.
Clear key
Press to clear entered values or characters.
Reset key
Press to restore the standard settings of the machine.
ID(Log In/Out) key
Press to log in/out when a login service such as
Department ID Management or SSO-H has been set.
Brightness Adjustment Dial
Use to adjust the brightness of the touch panel display.
Volume Settings key
Press to display the screen for adjusting settings, such as
the transmission volume and fax sending/receiving alarm
volume.
[Status Monitor/Cancel]
Press to check the status of jobs or to cancel print jobs.
Also, you can check the status of the machine such as the
amount of paper remaining in the paper source.
[Quick Menu]
Press to display functions registered in the Quick Menu.
3
15 14 13 12 11
Flow of Basic Operations
4 5
8 6
10 9 7
35