Herunterladen Inhalt Inhalt Diese Seite drucken

Cleaning And Maintenance; List Of Spare Parts - Baron SERIE 700 Aufstellung, Gebrauchs- Und Instandhaltungs Anweisungen

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
Data Emissione 27/06/2003
- Before switching on the heating, fill the basin with water until its
level is above the minimum mark and below the maximum.
- Turn the knob M to the position corresponding to the desired
temperature. The two, green and yellow LEDs will be on. As the
desired temperature is reached, the yellow LED gets off.
6.4 Disconnecting the heating
- Disconnect the heating, turning the knob M (fig. 1) to 0: the green
and yellow LEDs will get off.
6.5 Switching off the cooker in case of fault
- In case of any fault, stop the equipment operation turning the
knobs M (fig. 1) to 0.
- Turn off the main power switch, installed before the equipment.
- Call an authorized After-Sales Service Centre.

7 - CLEANING AND MAINTENANCE

- Before carrying out any cleaning operation, check that the main
power switch, installed before the equipment, is off.
- Wash the surfaces of stainless steel with water and non abrasive
detergents, every day; then rinse abundantly and wipe carefully.
- When cleaning stainless steel, never use detergents with abrasive
substances, nor steel wool, brushes or scrapers of common steel.
- Clean the floor under the range with non corrosive products.
- Do not wash the equipment with water jets.
When the equipment must not be used for long time, comply with
the following instructions:
- Disconnect the main power switch, installed before the equipment.
- Clean all the surfaces carefully.
- Protect the surfaces of stainless steel laying off a light film of white
mineral oil with a cloth.
- Ventilate the rooms periodically.
- Check the equipment periodically (at least once a year); this check
must be carried out by qualified professional personnel. Drawing
up a maintenance contract is recommended.

8 - LIST OF SPARE PARTS

- Resistors of 1.83 kW - 230 V, for pasta cookers series 700
- Resistors of 2.76 kW - 230 V, for pasta cookers series 900
- Main four-pole switch
- Three-pole thermostat for temperature control
- Safety three-pole thermostat of manual reset
- Drain cock of the basin
- Water feeding cock
- Control knobs
- Green and yellow warning lights (LEDs)
13
Revisione 0.0

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Serie 900

Inhaltsverzeichnis