Abicor Binzel ROBO Compact W600 Betriebsanleitung Seite 53

ROBO Compact W600
12.2 Consumables
12.3 Packaging
13 Options
13.1 Wire brake
1
1 Pneumatic cylinder
Fig. 10 Cross section wire brake
Oil, greases and cleaning agents must not contaminate the ground or enter the
sewage system. These substances must be stored, transported and disposed of
in suitable containers. Please observe the relevant local regulations and
disposal instructions in the safety data sheets specified by the manufacturer of
the consumables. Contaminated cleaning tools (brushes, rags, etc.) must also
be disposed of in accordance with the information provided by the
consumables' manufacturer.
ABICOR BINZEL has reduced the transport packaging to the necessary
minimum. The ability to recycle packaging materials is always considered
during their selection.
The wire brake is a pneumatic cylinder (1) that is used to secure the welding
wire (2) in the torch neck. This enables precise measuring during
"wire sensing" and establishing the TCP position of the welding wire.
A
2 Welding wire
13 Options
2
EN - 27