Inhaltsverzeichnis
Werbung
62
Bench grinder
THE NUMBERS IN THE FOLLOWING TEXT
REFER TO THE DRAWINGS ON PAGE 2
SAFETY AND OPERATING INSTRUCTIONS
For your own safety and for the safety of others,
please read these instructions carefully before
using this appliance. It will help you understand your product
more easily and avoid unnecessary risks. Keep this instruction
manual in a safe place for future use.
CONTENTS
1. Machine data
2. Safety instructions
3. Installation
4. Operation
5. Maintenance
1. MACHINE DATA
TECHNICAL SPECIFICATION
Voltage
Frequency
Power input
No load speed
Grinding stone dimensions | 150x20 mm
White grinding stone dimens.| 150x40 mm
Weight
Lpa (sound pressure)
PRODUCT INFORMATION
Fig. A.
1. On/off switch
2. Support (Right)
3. Cover glass
4. Cover glass holder
5. Screw
6. Support (Left)
Ferm
Ferm
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this manual and/or on the machine the following
symbols are used:
In accordance with essential applicable safety
standards of European directives
Risk of damaging material and/or physical
injuries
Risk of an electric shock
Read instruction manual
Immediately unplug the plug from the mains
electricity in the case that the cord gets damaged
and during maintenance
Wear eye and ear protectors
Faulty and/or discarded electrical or electronic
apparatus have to be collected at the appropriate
recycling locations.
When using electric machines always observe the safety
regulations applicable in your country to reduce the risk
| 230 V
of fire, electric shock and personal injury. Read the
| 50 Hz
following safety instructions and also the enclosed safety
| 370 W
instructions.
| 2950/min. S
=30 min.
2
ELECTRICAL SAFETY
| 10 kg
Always check that the power supply corresponds to
| 76 dB(A)
the voltage on the rating plate.
Replacing cables or plugs
Immediately throw away old cables or plugs when they
have been replaced by new ones. It is dangerous to insert
the plug of a loose cable in the wall outlet.
Using extension cables
•
The grinding machine is fitted with a three-core cable
and earthed plug. Therefore, always connect the plug
to an earthed socket. If you have to use an extension
cable, make sure it is three-core and fitted with an
earthed plug and connector.
•
The minimum conductor size is 1.5 mm
BEFORE USING THE MACHINE:
1. Check the following:
-
Make sure that your machine is correct for your
power supply.
-
Make sure the socket is earthed;
-
Make sure the cable and socket are in good condition,
i.e. not frayed or damaged.
2. Do not use long extension cables.
Use only earthed extension cables.
3. A grinding stone is fragile.
The stone is easily damaged when being dropped, hit,
etc. Always grind with the face of the grinding stone,
2
.
3
Werbung
Inhaltsverzeichnis
